Siemens, LOGO!POWER DIN Rail Panel Mount Power Supply, 12V dc Output Voltage, 1.9A Output Current

  • RS Stock No. 734-2705
  • Mfr. Part No. 6EP1321-1SH03
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): AT
Product Details

SITOP LOGO!Power

Our miniature power supply units in the same design as the logic modules offer great performance in the smallest space. Efficiency has been improved across the entire load range, and the low-power losses in no-load operation ensure efficient operation. The power supplies are suitable for universal use due to their wide-range input for single phase networks and operation with direct voltage. They also have a wide operating temperature range, comprehensive certifications and switch-on behaviour optimised for capacitive loads. These reliable power supplies with their flat, stepped profile can be used flexibly in numerous applications such as in distribution boards.

To increase the 24 V availability, the LOGO!Power supplies can be combined with DC UPS, redundancy and selectivity modules.

Features and Benefits

• Single phase, wide input range 85 V to 264 V ac or 110 V to 300 V dc • Power reserve on starting up through 1.5 times the rated current for capacitive loads
• Wide temperature range: -20°C to 70°C
• Installation depth of 55 mm
• High efficiency across the entire load range

Approvals

cULus, cURus, NEC class 2, CE, CB, FM, ATEX, cCSAus Class I Div. 2, GL, ABS

Warning

  • This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review alternative highlighted by the manufacturer. Alternatively, refer to the cross reference list in the Technical Reference section which highlights the upgrade path for your current generation of products.
Specifications
Attribute Value
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 12 V dc
Output Current 1.9 A
Power Rating 23W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 90mm
Width 54mm
Series LOGO!POWER
Depth 52.6mm
Hazardous Area Certification ATEX
Minimum Temperature -20°C
Output Voltage Adjustment Range 10.5 → 16.1V
Mounting Type DIN Rail Mount
Load Regulation 1.5%
Ripple And Noise 200mV Pk-Pk
Maximum Temperature +70°C
Temporarily out of stock - back order for despatch when stock is available
Price Each
MYR 510.88
units
Per unit
1 +
MYR510.88
Related Products
A range of ultra slim single output DIN ...
Description:
A range of ultra slim single output DIN Rail power supplies with short circuit, overload and over voltage protection. These PSUs can be installed on DIN Rail TS-35/7.5 or 15 and offer cooling by free air convection. Universal AC input/Full ...
The TBLC series DIN Rail mounting power supplies ...
Description:
The TBLC series DIN Rail mounting power supplies are designed for industrial and residential applications. They are lower cost than the existing TBL range, with similar electrical specifications. Also, they fully comply to the new standby power and efficiency requirements ...
The low profile DRL series DIN Rail power ...
Description:
The low profile DRL series DIN Rail power supply provides a reliable solution for many industrial applications and building automation. With double insulation and safety Class II input, connection to earth is not required. The NEC Class 2 compliant output, ...
The TBL series is a new range of ...
Description:
The TBL series is a new range of small DIN-rail mount power supplies which have been designed particularly with building and factory automation applications in mind. The ultra-compact low profile cases fit in the standardised wall mounted control panels used ...