Mean Well, EDR DIN Rail Power Supply, 24V dc Output Voltage, 3.2A Output Current

  • RS Stock No. 122-2205
  • Mfr. Part No. EDR-75-24
  • Manufacturer Mean Well
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Mean Well EDR Series Single Output Industrial Power Supply

Economical and slim, the EDR range of power supplies can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation.
The entire series can operate between -20°C and 60°C under air convection.
The EDR series is an ideal choice for many industries, fitting various inductive or capacitive applications.

Features and Benefits

• Universal AC input/Full range
• Short circuit/Overload/Over voltage/Over temperature protections
• Can be installed on DIN Rail TS-35/7.5 or 15
• Cooling by free air convection
• UL 508 (industrial control equipment) approved
• EN61000-6-2 (EN50082-2) industrial immunity level
• 100% full load burn-in test
• 2 years warranty

Product Application Information

The EDR series PSU by Mean Well is ideal for use in machine industrial control systems, semiconductor fabrication equipment, factory automation and electro-mechanical apparatus.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Mean Well EDR-75-24 Power Supply, 24 V, 3.2 A, 76.8 W

Efficiency 87.5 % Protection type : Shut down o/p voltage, re-power on to recover.

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 90 → 264V ac
Output Voltage 24 V dc
Output Current 3.2 A
Power Rating 75W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 32mm
Special Features Overvoltage and Short Circuit Protection
Depth 102mm
Minimum Temperature -20°C
Ripple And Noise 120mV Pk-Pk
Load Regulation ±1%
Output Voltage Adjustment Range 24 → 28V
MTBF 506.6kh
Mounting Type DIN Rail Mount
Maximum Temperature +60°C
Standards Met RoHS Compliant, TUV EN 60950-1, UL 508
Series EDR
62 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 282.83
units
Per unit
1 +
MYR282.83
Related Products
230Vac input 24Vdc (nom) output safety isolating transformer ...
Description:
230Vac input 24Vdc (nom) output safety isolating transformer to VDE0551, EN607424kV input/output flash testedFinger safe easy accessible screw terminalsDouble screw terminals on the outputInput and output fuse protectionLED output voltage indicatorParallelable (with same type)Electrolytic capacitor in the output ...
230Vac input 24Vdc stabilised outputSafety isolating transformer to ...
Description:
230Vac input 24Vdc stabilised outputSafety isolating transformer to VDE 0551, EN 607424kV input/output flash testedFinger safe easy accessible screw terminalsDouble screw terminals on the outputInput and output fuse protectionLED output voltage indicator.
The Convert Select series are DIN Rail mountable ...
Description:
The Convert Select series are DIN Rail mountable DC-DC and AC-DC converters. They have power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges, and low electromagnetic emissions. Internal protection circuits such as ...
Power factor 0.93, harmonics IEC/EN 61000-3-2Emissions according to ...
Description:
Power factor 0.93, harmonics IEC/EN 61000-3-2Emissions according to CISPR 22/EN 55022High efficiencyShort term output peak power capabilitiesIndependently regulated outputsOutputs, no load, overload, and short circuit proofExtremely small case sizeLoad regulation (10-100%) - 1.5% Vo nom.