Omron, S8VM DIN Rail Panel Mount Power Supply, 12V dc Output Voltage, 27A Output Current

  • RS Stock No. 110-249
  • Mfr. Part No. S8VM30012C
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

15W to 1500W S8VM Series with Downtime warning

The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose different types of voltage dip and loss which in turn can be wired into a PLC or management system to warn of impending problems.

Series Benefits.

Output voltages easily identified by colour coded labels on the side of the unit
Meets the latest European and relevant international standard
Operating temperature range 0°C to +50°C

Part Number S8VM- 30012C

The S8VM Switch mode, Bottom-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM- 30012C has a power rating of 300 W and an output voltage of 12 V dc plus a rated input voltage of 100 V ac to 240 V ac. This Standard model incudes green output indicators plus has a fan providing forced air cooling. Bottom mounted power supplies can be front mounted using the correct mounting bracket for 300 w, 600 W and 1500 W models. Part number S8VM-03015C can be front mounted using a DIN Rail mounting bracket series S82Y-VM. Brackets are sold separately – see example stock number 818-6815.

Features and Benefits.

• Covered type power supply • Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• Bottom mount
• Green output indicators
• Forced air cooled – built in fan
• Power rating 300 W
• Output voltage 12 V dc
• Input voltage 100 V ac to 240 V ac
• Rated output current 27 A
• Harmonic current emissions
• Efficiency 78% min.
• Frequency 50/60 Hz
• Power failure alarm output – open collector 30 V dc, 50 mA.
• Electric shock finger protection
• RoHS compliant including Lead Free construction

What is a DIN Rail Mounted Power Supply?

A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety and Storage.

Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge. Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.

Standards

UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No. 213, EN50178, EN60950-1. Harmonic current emissions conform to EN61000-3-2.

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 12 V dc
Output Current 27 A
Power Rating 300W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 83.5mm
Width 62.5mm
Ripple And Noise ±2%
Mounting Type DIN Rail Mount
Series S8VM
Maximum Temperature +50°C
Load Regulation ±0.8%
MTBF 135000h
Efficiency 78%
Minimum Temperature 0°C
Depth 188mm
Discontinued product