Omron, S8VM DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 2.2A Output Current

  • RS Stock No. 110-198
  • Mfr. Part No. S8VM-05024AD
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

15W to 1500W S8VM Series with Downtime warning

The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose different types of voltage dip and loss which in turn can be wired into a PLC or management system to warn of impending problems.

Series Benefits.

Output voltages easily identified by colour coded labels on the side of the unit
Meets the latest European and relevant international standard
Operating temperature range 0°C to +50°C

Part Number S8VM-05024AD

The S8VM Switch mode, DIN Rail-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM-05024AD has a power rating of 50 W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This model also includes a Sinking under-voltage alarm with green output indicators and is natural air-cooled. The under-voltage alarm allows you to investigate any errors and a power failure alarm notifies you of output voltage errors.

Features and Benefits.

• Covered type power supply • Terminal block structure
• Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• DIN Rail Mounting
• Sinking – Under-voltage alarm
• Green output indicators
• Natural air cooled
• Power rating 50 W
• Output voltage 24 V dc
• Input voltage 100 V ac to 240 V ac
• Efficiency 80% min.
• Frequency 50/60 Hz
• Rated output current 2.2 A
• Under-voltage alarm output – open collector 30 V dc maximum, 50 mA maximum Sinking (NPN)
• Electric shock finger protection
• RoHS compliant

What is a DIN Rail Mounted Power Supply?

A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety and Storage.

Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge. Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance150 m/s **2 in each 6 directions 3 times.

Standards

UL508/60950-1, CSA C22.2 No. 14/No. 60950-1, EN50178, EN60950-1, SEMI F47-0200 (when 200 V input is used). EN61000-3-2.

Specifications
Attribute Value
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 2.2 A
Power Rating 50W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 84.5mm
Width 38.6mm
Efficiency 80%
Maximum Temperature +50°C
Series S8VM
MTBF 135000h
Load Regulation ±0.8%
Mounting Type DIN Rail Mount
Ripple And Noise ±0.75%
Depth 138.1mm
Minimum Temperature 0°C
Discontinued product
Related Products
Superior Basic Performance That Ensures Reliability. Greater Usability. ...
Description:
Superior Basic Performance That Ensures Reliability. Greater Usability. Superior basic performance that ensures reliability Ambient temperatures up to 70°C, greater resistance to rusting with aluminium/stainless steel case, and applications at altitudes up to 3, 000 m.Greater Usability The Terminal Block ...
230Vac input, 12 or 24Vdc (nom) output power ...
Description:
230Vac input, 12 or 24Vdc (nom) output power supply/safety isolating transformerManufactured to EN 61 558, VDE 0570Fully encapsulated in a plastic housingDesigned for easy installation on DIN EN50 022 rails3.75kV input/output flash testedScrew terminals for both input and outputEfficiency 75% ...
Miniature size and lightweightQuick and easy mounting onto ...
Description:
Miniature size and lightweightQuick and easy mounting onto 35mm DIN-railSpring clamp terminals72W and 100W meet PFC standard EN61000-3-2Adjustable output voltageOverload and short circuit protectedOutput LED indicatorSuitable for use in harsh environment.
Power supplies that deliver a non-filtered 24 V ...
Description:
Power supplies that deliver a non-filtered 24 V output.These supplies comprise a safety transformer with electro-static display and dual terminal block for single-phase applications.The secondary output is protected by a fuse.A green indicator light shows the operating voltage.Supplied with coupling ...