- RS Stock No.:
- 608-6410
- Mfr. Part No.:
- ABL6TS100U
- Manufacturer:
- Schneider Electric
- RS Stock No.:
- 608-6410
- Mfr. Part No.:
- ABL6TS100U
- Manufacturer:
- Schneider Electric
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CZ
Product Details
ABL 6TS safety transformers
Single-phase single-winding safety and isolation transformers.
Able to supply higher powers on occasion.
Feature a panel display to reduce ESD.
Screw termination.
Plate mounting.
Able to supply higher powers on occasion.
Feature a panel display to reduce ESD.
Screw termination.
Plate mounting.
Standards
IEC 61558-2-6 , EN61558-2-6
Schneider Electric Chassis Mounting Transformer, Single Output, 14.35kg Weight - ABL6TS100U
To achieve a power input that's not too high, not too low, but just right, choose this chassis mounting transformer from Schneider Electric. It's a versatile choice, thanks to a supply voltage range of 230 to 400V AC with +/-15V leeway. To keep your equipment ticking along smoothly, it supplies a steady output of 230V AC. Screw termination makes installing this unit a speedy process and your connections will be sturdy enough to stand up against vibration.
• 94% efficiency makes it an energy-conscious choice that produces minimal waste heat
• Broad operating temperature range of -20°C to +50°C means it suits harsh industrial conditions
• Made free from mercury and PVC for a low environmental impact
• TC-treated exterior reliably resists corrosion
• Broad operating temperature range of -20°C to +50°C means it suits harsh industrial conditions
• Made free from mercury and PVC for a low environmental impact
• TC-treated exterior reliably resists corrosion
Applications
• Factory automation
• Automotive workshops
• Mining and minerals processing
• Automotive workshops
• Mining and minerals processing
What size is this unit?
This transformer has compact dimensions of 138 (H) x 174 (W) x 162mm (D), so it's a space-efficient choice for your setup.
Does this device have an ingress protection rating?
An IP20 rating means it's touch-proof and resistant to dust or objects, like tools or wires, bigger than 12mm.
Laminated Frame 230Vac Primary 75VA to 200VA (Multi Tapped)
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding.
Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Multi-hole frame fixing
Solder tag terminations
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742
Fully shrouded bobbins
Full varnish impregnation
Multi-hole frame fixing
Solder tag terminations
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742
Specifications
Attribute | Value |
---|---|
Primary Voltage Rating | 230 → 400V |
Secondary Voltage Rating | 230V ac |
Power Rating | 1kVA |
Number of Outputs | 1 |
Mounting Type | Chassis |
Efficiency | 94% |
Length | 174mm |
Width | 138mm |
Depth | 162mm |
Dimensions | 138 x 174 x 162mm |
Fixing Hole Diameter | 7mm |
Weight | 14.35kg |
Minimum Operating Frequency | 47Hz |
Maximum Operating Frequency | 63Hz |
Standards Met | CE |
Maximum Temperature | +50°C |
Minimum Temperature | -20°C |