SEGGER 8.06.20 RL78 14-pin Programming Adapter for use with J-Link 20-Pin 0.1 in Target Connector to Renesas 14-Pin E1
- RS Stock No.:
- 146-4387
- Mfr. Part No.:
- 8.06.20 RL78 14-pin Programming Adapter
- Manufacturer:
- SEGGER
2 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR396.12
Units | Per Unit |
1 + | MYR396.12 |
- RS Stock No.:
- 146-4387
- Mfr. Part No.:
- 8.06.20 RL78 14-pin Programming Adapter
- Manufacturer:
- SEGGER
Technical data sheets
Legislation and Compliance
Product Details
The Flasher RL78 Adapter converts the standard J-Link 20-pin 0.1" connector to the standard 14-pin E1 connector defined by Renesas. Please note that this adapter is usable only with the Flasher PRO and the Flasher Portable PLUS and only for the purpose of flash programming. It cannot be used with a J-Link and it cannot be used for debugging RL78 devices.The TOOL0 pins of the RL78 devices are open drain and require an external pull-up resistor. This resistor is usually placed on the evaluation board, nevertheless the adapter has an additional solder bridge between VTREF and TOOL0 to place the pull-up resistor.
Specifications
Attribute | Value |
---|---|
For Use With | J-Link 20-Pin 0.1 in Target Connector to Renesas 14-Pin E1 Connector |