Energy Harvesting Generator Wireless Switch Generator for use with Wireless Snap and Rocker Switches

  • RS Stock No. 894-8981
  • Mfr. Part No. AFIM-1001
  • Manufacturer ZF
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Energy Harvesting RF Generator Plug and Play

The Cherry Energy Harvesting Generator turns mechanical vibration into electrical energy. When actuated, a mechanical force acts vertically on the end of the generator’s lever. A patented mechanism then converts the mechanical energy generated into electrical energy in the form of a voltage pulse. Please note that this product must be used in conjunction with suitable RF electronics. This Energy Harvesting Generator is integral to Cherry's rocker and snap switches (Rocker – Stock no 8736671 & Snap – Stock no 8736675).
The Cherry AFIM-1001 offers a Plug and Play functionality the RF generator is mounted on a board and comes complete with built in RF electronics, ZF protocol wire, antenna and is configured for 868MHz. Ideally suited for easy design in of the RF generator.

Small size, with high energy efficiency
Long mechanical life.


Energy Harvesting
In our connected world, there is strong demand for easy and flexible data transmission, preferably with low energy consumption. Cherry's innovative wireless and battery-less Energy Harvesting Generator is effective in a variety of environments and functions. Energy harvesting can be found in diverse market sectors, including industrial and building automation, smart home and medical. Cherry's technology offers an excellent wireless alternative to wired or battery-powered equipment. Compatible with multiple protocols (product dependant), the products are suitable for global use. As there is no need to change or dispose of batteries, the solution is both environmentally friendly and low maintenance.

Attribute Value
Accessory Type Wireless Switch Generator
For Use With Wireless Snap and Rocker Switches
12 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 173.09
Per unit
1 - 4
5 - 9
10 - 24
25 - 49
50 +
Related Products
Small size, low cost 16x4 pixels IR array ...
Small size, low cost 16x4 pixels IR array Easy to integrate Industry standard four lead TO39 package Factory calibrated infrared temperature measurement. Calibration parameters stored in EEPROM. Noise Equivalent Temperature Difference (NETD) 0.20K RMS @4Hz refresh rate I2C compatible digital ...
Compatible Design Upgrade 3D Printers Printers, POS Office ...
Compatible Design Upgrade 3D Printers Printers, POS Office and home automation Textile, Sewing Machines CCTV, Security ATM, Cash recycler HVAC2-phase stepper motors up to 2A coil current (peak) STEP/DIR Interface with 2, 4, 8, 16 or 32 microstep pin setting ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic NoiseSupports 2V to 14V Power SuppliesSpeed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...
300nA Quiescent Supply Current Into OUTTrue Shutdown Mode0.5nA ...
300nA Quiescent Supply Current Into OUTTrue Shutdown Mode0.5nA Shutdown CurrentOutput Disconnects from InputNo Reverse Current with VOUT 0V to 5V95% Peak Efficiency400mV to 5.5V Input Range0.88V Minimum Startup Voltage1.8V to 5V Output Voltage Range100mV/StepSingle 1% Resistor Selectable Output225mA, 500mA, and ...