Development Kit Galvanic Isolator for use with Isolation MCU

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Opto 2 click is a galvanic isolator Click board™, used to provide an optical isolation of sensitive microcontroller (MCU) pins, when operated by external signals. TLP2770 opto-isolation elements (optocouplers) can be driven with a very low current, down to 1.3mA (min). A choice of high-speed optocouplers allows Opto 2 click to be used on communication lines, with up to 20 Mbps data rates. This Click board™ can be used to provide an optical isolation when there is a requirement for a high reinforced isolation between the external signal lines and the controller logic with a MCU such as in PLCs or similar applications

Programmable Logic Controllers (PLCs)
Battery Management System (BMS)
Industrial Inverters
Package: SO6L
Data transfer rate: 20 MBd (typ.) (NRZ)
Supply current: 0.4 mA (max)
Threshold input current: 1 mA (max)
Supply voltage: 2.7 to 5.5 V
Operating temperature: -40 to 125 
Propagation delay time: tpHL/tpLH = 60 ns (max)
Pulse width distortion: |tpHL-tpLH| = 25 ns (max)
Isolation voltage: 5000 Vrms (min)

Attribute Value
Accessory Type Galvanic Isolator
For Use With Isolation MCU
9 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 120.80
Per unit
1 +