SEGGER J-Trace Isolator
- RS Stock No.:
- 172-3027
- Mfr. Part No.:
- 8.07.10 J-Trace Isolator
- Manufacturer:
- SEGGER
6 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR2,575.25
| Units | Per Unit |
| 1 + | MYR2,575.25 |
- RS Stock No.:
- 172-3027
- Mfr. Part No.:
- 8.07.10 J-Trace Isolator
- Manufacturer:
- SEGGER
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
SEGGER Microcontroller J-Trace
The SEGGER Microcontroller KG J-Trace is an isolator. It can be connected between a J-Trace Pro V2 or any ARM-board that uses the standard 19-pin Cortex-M connector to provide electrical isolation while keeping high-speed peed trace capabilities. This is essential when the development tools are not connected to the same ground. It is useful to protect the development tools from electrical spikes that often occur in some applications.
Features and Benefits:
• 1 kV DC isolation
• 3 LEDs to indicate emulator power, target power and target RESET
• ETM trace pins fully supported up to 75MHz trace clock
• JTAG frequency: up to 50MHz
• JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
• Powered from an emulator, a few microamps (<25μA) drawn from a target
• SWD frequency: up to 4MHz
• 3 LEDs to indicate emulator power, target power and target RESET
• ETM trace pins fully supported up to 75MHz trace clock
• JTAG frequency: up to 50MHz
• JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
• Powered from an emulator, a few microamps (<25μA) drawn from a target
• SWD frequency: up to 4MHz
Specifications
Attribute | Value |
|---|---|
| Kit Name | J-Trace Isolator |
| For Use With | 19 Pin Cortex-M, ARM-Board |
| Product Type | Programmer |