Parallax Inc, DC Motor Controller, 3 Phase, 7.4 → 11.1 V dc, 30 A

  • RS Stock No. 794-7155
  • Mfr. Part No. 750-90000
  • Manufacturer Parallax Inc
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

GemFan 30A BLDC motor speed controller

Electronic Speed Controllers (ESCs) are used on most R/C equipment for controlling the speed of a brushless DC motor. Compatible with a standard R/C receiver or any 3.3V or 5V microcontroller providing a standard PWM servomotor control signal.

Programmable with an ESC programming card
5V Battery Eliminator Circuit (BEC)
Three-phase electronic control of BLDC motor
Two (2S) or three (3S) cell Li Polymer battery input
Power requirements: 7.4 to 11.1Vdc
Continuous maximum current: 30A
Communication: R/C servo PWM
Dimensions: 48.26 x 25.4 x 7.62mm
Weight: 27g

The Propeller™ 1 microprocessor chip makes it easy to rapidly develop embedded applications. Its eight 32-bit processors (COGs) can operate simultaneously, either independently or cooperatively, sharing common resources through a central hub. The developer has full control over how and when each cog is employed; there is no compiler-driven or operating system-driven splitting of tasks among multiple cogs. A shared system clock keeps each cog on the same time reference, allowing for true deterministic timing and synchronization. Two programming languages are available: the easy-to-learn high-level Spin, and Propeller Assembly which can execute at up to 160 MIPS (20 MIPS per COG).

Attribute Value
Supply Voltage 7.4 → 11.1 V dc
Current Rating 30 A
Voltage Rating 11.1 V dc
Compatible Motor Type Brushless DC Motor
Phase 3
Length 48.26mm
Width 25.4mm
Depth 7.62mm
Dimensions 48.26 x 25.4 x 7.62 mm
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 65.90
Per unit
1 - 9
10 +
Related Products
The PCU D10 display and control panel connects ...
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protectionPanelmountingCut out 68x68 mmFor use ...
ST5-S and ST10-S step drives offer the following ...
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadratureAnalogue velocity (oscillator) modeHost commands (SCL compatible)SiNet hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadratureHost control modeIdle current reductionAnti-resonanceTorque ripple smoothingMicrostep ...
Drives motors up to 85V and 6A/phaseOn board ...
Drives motors up to 85V and 6A/phaseOn board output drive current setting (2.5 to 6.0A)High efficiency chopped constant current power stage provides increased performance and reduced current consumptionSingle supply rail simplifies power supply requirementsShort-circuit and open circuit protected stage for ...