Parker, DC Motor Controller, 1 Phase, Voltage Control, 110 → 500 V, 32 A, Wall Mount

  • RS Stock No. 240-6731
  • Mfr. Part No. 514C-32-00-00-00
  • Manufacturer Parker
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

514C Range (Regenerative) Speed Controllers

The 514C range of isolated dc motor speed controllers provide fully regenerative (four quadrant) control of dc shunt and permanent magnet motors. They are particularly suitable for overhauling load applications or where accurately controlled braking is required.

Fully regenerative, four-quadrant motor control
Internal logic control of power supply ac contactor
Ramped speed input, auxiliary and inverted auxiliary inputs

Features of 512C and 514C Range Speed Controllers

Jumper-selectable single phase input voltage 110//120 or 220//240 or 380/415V ±10%
Linear current feedback allowing accurate torque
Zero speed or zero set point relay driver output - 24Vdc
Total setpoint output
Stall detection and trip
Field bridge suitable for UK or continental voltages
Overload capacity 150% of nominal current for 60s
Adjustable maximum current level
Adjustable maximum and minimum speed

Adjustable I.R. compensation (for armature voltage feedback speed control)
Adjustable speed stability
Independent control of speed ramp, both up and down from 0-40s
Indication of mains supply on, stall trip and overcurrent trip
Switch selectable current calibration
Switch selectable Armature/Tacho generator feedback
Buffered 0-10V output for a speed reference or meter
Buffered 0-7.5V output for a current meter (7.5V = 150%)

Supplied with

a comprehensive instruction manual.

Attribute Value
Supply Voltage 110 → 500 V
Current Rating 32 A
Voltage Rating 360 V dc
Compatible Motor Type Permanent Magnet, Shunt
Control Input Voltage
Mounting Style Wall Mount
Phase 1
Length 240mm
Width 160mm
Depth 130mm
Dimensions 240 x 160 x 130 mm
Operating Temperature Range 0 → +40 °C
7 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 4,623.49
Per unit
1 +
Related Products
The Pmod DPG1 is a differential pressure gauge ...
The Pmod DPG1 is a differential pressure gauge module featuring an NXP MP3V5010DP piezoresistive transducer and a Texas Instruments ADCS7476 12-bit ADC. • 0 to 10kPa differential pressure range• Temperature compensated and calibrated• Host communication: SPI bus• Follows Digilent Pmod ...
Ultra wide input voltage range: 200 - 1500VDCIndustrial ...
Ultra wide input voltage range: 200 - 1500VDCIndustrial grade operating temperature: -40℃ to +70℃4000VAC high isolation voltageHigh efficiency, Low ripple & noiseInput under-voltage protection, reverse input voltage protection, Output short circuit, over-current, over-voltage protectionUL 1741/CSA-C22.2 No.107.1, ...
Industry Standard1"X1" (MGS15) , 1"X2" (MGS30)High efficiency by ...
Industry Standard1"X1" (MGS15) , 1"X2" (MGS30)High efficiency by synchronized rectification circuit (MGS10/MGS15/MGS30)6 sided shield (MGS15/MGS30)I/O isolation voltage DC1,500V (1 minute)Built-in overcurrent protection circuits (recovers automatically)Built-in overvoltage protection circuits (MGS30)Built-in ...
TDK SDC series pin terminal electromagnetic buzzers have ...
TDK SDC series pin terminal electromagnetic buzzers have built in oscillator circuits so an output can be produced when connecting to a DC power supply. These buzzers are compact and high reliability. Operating temperature -10 to +70°C. Home appliancesPersonal computers ...