TE Connectivity, Amplimite HD-20 15 Way Panel Mount D-sub Connector Socket, 2.77mm Pitch

Technical data sheets
Legislation and Compliance
Non Compliant
Product Details

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.

These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

The AMPLIMITE series are designed to be used in communication and data interfaces.
• 65% higher density than HD-20 connectors
• Space saving
• 94V0 black thermoplastic insert
• Tin plated, steel shell

Features and Benefits

• Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.
• Lower cost, commercial version of the military approved series.
• Tin or zinc plated shells, with or without grounding indents.
• Crimp snap-in contacts allows loading of only the number of contacts being used.
• Available with shielding hardware and shielding enclosure kits.
• Numerous cable clamps and mating hardware options.
• Low cost, high performance, precision formed crimp contacts.

Accessories

• Crimp contacts – 446-787
• Male screw retainers – 450-9208 & 717-4498
• Female screw-locks – 717-4543 & 450-9270
• Locking post assembly – 450-9365
• Spring latch – 450-9321
• Latching block with threaded hole – 450-9371
• Latching block with slot recess – 680-9392

Approvals

UL, cUL, CSA

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specifications
Attribute Value
Number of Contacts 15
Gender Female
Body Orientation Straight
Mounting Type Panel Mount
Pitch 2.77mm
D Connector Type Standard D-Sub
Termination Method Solder
D-Sub Shell Size A
Current Rating 3.0A
Housing Material Steel
Voltage Rating 250 V ac
Length 39.2mm
Width 12.5mm
Depth 14.9mm
Dimensions 39.2 x 12.5 x 14.9mm
Contact Material Phosphor Bronze
Maximum Operating Temperature +105°C
Minimum Operating Temperature -55.0°C
Series Amplimite HD-20
Contact Plating Gold over Nickel
475 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 5)
Was MYR25.654
MYR 24.932
units
Per unit
Per Pack*
5 - 120
MYR24.932
MYR124.66
125 - 370
MYR20.248
MYR101.24
375 - 995
MYR18.354
MYR91.77
1000 - 1995
MYR16.722
MYR83.61
2000 +
MYR15.89
MYR79.45
*price indicative
Packaging Options:
Related Products
WR-DSUB series PCB, through hole right angle mount ...
Description:
WR-DSUB series PCB, through hole right angle mount D-sub pin header and socket connectors with UNC 4-40 hex screw locks. These d-sub PCB mount header and socket connectors have a black UL94-V0 PBT insulator with a steel tin plated shell ...
Available in 4 industry sizes/positions (9, 15, 25, ...
Description:
Available in 4 industry sizes/positions (9, 15, 25, 37).Plug shell has indents to provide grounding and additional retention.Available in many mounting and grounding to PCB options.Non-removable contactsShell: SPCC, Nickel PlatedInsulator: PA9T-Black - (260°C process temp)Contacts: Brass, Gold Plated (Entire ...
Dual port d-subs available in 4 industry sizes/positions:Standard ...
Description:
Dual port d-subs available in 4 industry sizes/positions:Standard Density (9 pin, 15 pin, 25 pin, 37 pin) & High Density (15 pin)Low cost, high performance stamped contacts.Stacked d-sub provides proper mating while maximizing board space.Nickel plated shells have ground indents ...
Available in 9 and 25 position standard D-Sub.Available ...
Description:
Available in 9 and 25 position standard D-Sub.Available in 15 position female High Density.Metal shell provides shielding..Plug shells have indents to provide grounding and additional retention.Built in Board Locks add mechanical stability to pcb.Shell: Steel-nickel platedInsulator: Nylon black (260°C process ...