ABB CMS Series Current Sensor, 160A

  • RS Stock No. 833-2885
  • Mfr. Part No. CMS-200S8
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

ABB Circuit Monitoring System CMS

Circuit Monitoring Systems (CMS) are multichannel measurement systems for branch monitoring of electrical installations. Each system consists of a Control Unit and sensors with different measurement ranges and mounting possibilities. The systems can be installed easily within power distribution units. Due to the unique compact size, the system is also ideal as a retrofit solution for existing installations. Great importance has been placed on user friendliness, high accuracy and a wide measurement range (up to 160 A).

CMS-600 Supply- and Control Centre
Supplied as a unit with flat cable & connector set
Illuminated touch display
Intuitive menu navigation
Supply voltage 24 Vdc
Measure AC and DC currents up to 64 individual lines via CMS-Bus (4-wire flatcable)
Measured data can be remotely queried by a 2-wire RS-485 interface
RTU Modbus, Data rate 2400-115200 Baud
DIN Rail Mounting

Specifications
Attribute Value
Nominal Current 160A
Supply Voltage 690 V ac, 1500 V dc
Sensor Type CMS Sensor
Mounting Type Cable Mount
Frequency Bandwidth 50/60 Hz
Accuracy ±0.7 %
Bore Size 15mm
Series CMS
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Depth 45.5mm
Height 38.45mm
Width 45.5mm
Discontinued product
Related Products
Open loop current transducer with LEM ASICFor measuring ...
Description:
Open loop current transducer with LEM ASICFor measuring DC, AC and pulse currentsWith galvanic separation between primary and secondary circuitsUnipolar voltage supplyReference accessVoltage outputFixed offset voltage with corresponding amplificationWith built-in primary power rails for soldering on circuit ...
TLI4970 high-precision current sensors from Infineon are based ...
Description:
TLI4970 high-precision current sensors from Infineon are based on their Hall technology. They are straight-forward, fully digital solutions which do not require external calibration or extra parts to function. Their compact footprint is also made possible by a coreless technology. ...
Current sensors for electronic measurement of alternating, direct ...
Description:
Current sensors for electronic measurement of alternating, direct and pulse currents with galvanic insulation between the primary circuit (strong current) and secondary circuit (electronic circuit).Hall Effect measuring principle.Voltage output proportional to current measured.The SP5 version features single-pole ...
AC / DC transformer with integrated signal preparationMeasures ...
Description:
AC / DC transformer with integrated signal preparationMeasures currents with VFD and SCR wavelengthElectrical isolationActual output; voltage or currentNo excess lossesCable entry to 32 mm ØSimple installation.