Druck UPS-III Current Loop Calibrator 24mA

  • RS Stock No. 434-7000
  • Mfr. Part No. UPS-III
  • Manufacturer Druck
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Druck Loop Calibrator - UPS III

Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers a wealth of time-saving features, all made possible through the advanced microprocessor-based electronics and large menu-driven graphics display.

Features & Benefits

• HART compatible with internal loop resistor
• Weighing just 275g (9.7 oz), and it's dimensional measurements are L129 x W77 x D24 mm - fitting comfortably in a shirt pocket
• Rugged, hardwearing and compact design
• The graphic display with a menu-driven interface has been designed to be super user-friendly
• The internal 0 to 24 V (volts) loop supply is available in both measure and source modes, this is essential during plant shutdowns
• Step, span check and value check can be easily carried out through linearity tests and zero/span adjustments
• The calibrator offers single-handed loop testing, valve set-up and slow rate checks through adjustable rates (1-599 secs)
• The continuity and switch test facility reduce DMM dependence when fault finding, checking loop integrity and testing switches
• Adjustable display contrast and resolution
• Battery voltage and low battery indicator
• The primary reading is shown in mA (milliamp) or %, as linear or square root (flow)
• Auto switch off can be enabled or disabled, when the auto power down is enabled it will power down 30 minutes ager the last key was pressed
• The measurement generation of 0 - 24mA DC
• Predefined values for quick testing of linear loops, flow loops and the control of valves
• Has an operating temperature of 14°F to 122°F (-10°C to 50°C)
• The power supply of this loop calibrator is through 4 x 1.5 V (volts) AA size alkaline batteries
• Electrical terminals are gold plated, 4 mm sockets

Looking for some accessories?

• A universal mains input adapter as an alternative power for the UPS III – 434-7038
• Carry case – 434-7022
• Protective nitrile rubber over-boot, ensuring an extra layer of protection for the device – 434-7016

What's included with the kit?

• A handy user manual
• Set of cables/wires
• Batteries - 4 x 1.5 V AA alkaline
• Calibration certificate as standard

Specifications
Attribute Value
Absolute Maximum Current Measurement 24mA
Best Accuracy ±0.01 %
Resolution 0.001 mA
Battery Type AA
Battery Life 75 h
Power Source Battery
Dimensions 24 x 77 x 129mm
Weight 275g
Height 129mm
Length 24mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Model Number p UPS-III
Width 77mm
50 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 4,795.15
units
Per unit
1 +
MYR4,795.15
Related Products
These compact, robust, easy-to-handle calibrators have large LCD ...
Description:
These compact, robust, easy-to-handle calibrators have large LCD screens and are suitable for use in highly diverse on-site conditions. They can calibrate an instrument in its operating environment and without removing it from the process. The principal functions are simulation ...
DPI 620 GENII IS is Druck's next-generation instrument ...
Description:
DPI 620 GENII IS is Druck's next-generation instrument for calibration, configuration and maintenance of electrical, frequency, pressure and temperature devices in measurement and control applications. It can measure and source a wide range of parameters simultaneously including mA, mV, V, ...
Pressure sensor intake 100 psi (7 bar) on ...
Description:
Pressure sensor intake 100 psi (7 bar) on full scale, accuracy 0.05 %.1/8 NPT connectorCompatible with non-corrosive gases and liquidsChoice of 11 different units (psi, in H²O at 4 °C, in H²O at 20 °C, cm H²O at 4 °C, ...
For measuring overpressure and vacuum with an internal ...
Description:
For measuring overpressure and vacuum with an internal sensorSuitable for non-corrosive gases and liquidsSelect from numerous technical units for the pressureSimultaneous measurement of pressure and current for simple P/I or I/P testing24 V loop supplyZero, min. / max., hold and ...