JAE Ratchet Crimping Tool for Crimp Contact

  • RS Stock No. 372-2135
  • Mfr. Part No. M22520/1-01
  • Manufacturer JAE
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

JAE Ratchet Crimp Tool

A quality hand crimp tool for crimping circular connector contacts. This handy tool has a cycle controlled precision ratchet which prevents the tool being opened before the crimping action is completed. This feature ensures accurate and consistently high-quality crimps are achieved each time and prevents partial crimps. An 8 indent selector knob on the tool enables the correct crimp setting to be selected and a positioner guide locks the positioner firmly in place.

Features and Benefits

Lightweight Wire size: 12-26 AWG 8-step selector knob for crimp depth selection Ratchet mechanism Interchangeable positioner compatible

Positioner

Positioners are not supplied with the tool and must be purchased separately.

Typical Applications: Maintenance & repair Electrical Installations Computer Interfacing Cable assembliesFAQ:How easy are they to use?They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure its fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.How do you maintain the product? There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.The Importance of a High-Quality CrimpWhen a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Connector Type Crimp Contact
Crimp Tool Type Ratchet
Wire Size AWG 26 12AWG
Temporarily out of stock - back order for despatch 19/02/2020, delivery within 6 working days from despatch date
Price Each
MYR 3,343.40
units
Per unit
1 - 2
MYR3,343.40
3 +
MYR3,259.78
Related Products
Professional handtool for the assembly of shielded Cat ...
Description:
Professional handtool for the assembly of shielded Cat 6 plugs.Crimps both the contacts and the shield fingers in a single step to maximize installation and applied cost efficiencies.
Suitable for QM single and two piece contacts. ...
Description:
Suitable for QM single and two piece contacts. Plier tool can also be used to crimp contacts for the Circular Sealed Industrial IP67 connector range and the Sealed Industrial IP68 connector range stock no. 489-526. Instructions supplied with tools. RF ...
Han M23 crimping tool for signal contact. Size ...
Description:
Han M23 crimping tool for signal contact. Size M23High contact densityRobust hoods and housings for industrial applicationsAssembly requires no toolsGood EMC properties6 to 19 contacts Crimp, solder and PCB solder connections.
Small lightweight waterproof plastic connectorEasy to operate push-pull ...
Description:
Small lightweight waterproof plastic connectorEasy to operate push-pull lockEasy cable clamping provided by integral strain relief sleevesPlug can be locked from wherever you hold itGuide ribs provided for reliable insertion guidance.