TE Connectivity DuraSeal Butt Wire Splice Connector, Blue, Insulated, Tin Plated 16 → 14 AWG

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

Splices

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Approvals

UL

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specifications
Attribute Value
Splice Type Butt
Wire Size 16 → 14 AWG
Overall Length 36mm
Diameter 4.6mm
Insulation Insulated
Colour Blue
Series DuraSeal
Shrouded Shrouded
Contact Material Copper
Contact Plating Tin
39550 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 50)
MYR 1.87
units
Per unit
Per Pack*
50 - 200
MYR1.87
MYR93.50
250 - 1200
MYR1.731
MYR86.55
1250 - 2450
MYR1.578
MYR78.90
2500 - 4950
MYR1.465
MYR73.25
5000 +
MYR1.387
MYR69.35
*price indicative
Related Products
Terminal or shunt IDC connector for cables of ...
Description:
Terminal or shunt IDC connector for cables of 0.5 mm2 to 1.5 mm2 with insulation of a maximum diameter of 3.8 mm.A mineral oil prevents corrosion and promotes sealing.Applications: automotive accessories, marine connections, lighting, etc.
Cold applied in-line splices that require no heating ...
Description:
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are ...
Clear shell push-wire connectors accommodate any combination of ...
Description:
Clear shell push-wire connectors accommodate any combination of 0.8 - 3.0mm² solid copper, or 'tinned end' multistrand copper conductors. Fast and easy no-twist push-in connectorsVisual confirmation of every connection and strip length shown on mouldingWire removal simply effectedRated to 105°CProbe ...
Quick Splice IDC wire splice connectors made from ...
Description:
Quick Splice IDC wire splice connectors made from brass with a colour coded nylon insulation. These Quick Splices provide an simple and time saving wire connection method. The splice is simply placed over the existing wire, the additional wire inserted ...