Schneider Electric LP5K Series Reversing Contactor, 24 V dc Coil, 3-Pole, 6 A, 1.5 kW, 3NO, 690 V ac
- RS Stock No.:
- 609-7959
- Mfr. Part No.:
- LP5K0601BW3
- Manufacturer:
- Schneider Electric
2 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
3 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR561.79
| Units | Per Unit |
| 1 + | MYR561.79 |
- RS Stock No.:
- 609-7959
- Mfr. Part No.:
- LP5K0601BW3
- Manufacturer:
- Schneider Electric
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- FR
Product Details
3 Pole Reversing Mini Contactors with Screw Clamp Termination
Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50/60Hz rated) of 4.5VA (Hold in) and 30VA (inrush).
Contactor Features.
6 Amps and 9 Amps switching current
3 poles + 1 auxiliary contact
35mm DIN Rail/ Screw mounting
Screw clamp termination
LED indication in front fascia
Compatible with PLC outputs
609-7971contact configuration 1N/C
609-7965 and 609-7987 contact configuration 1N/O
609-7959 contact configuration 1N/O-1N/C
3 poles + 1 auxiliary contact
35mm DIN Rail/ Screw mounting
Screw clamp termination
LED indication in front fascia
Compatible with PLC outputs
609-7971contact configuration 1N/C
609-7965 and 609-7987 contact configuration 1N/O
609-7959 contact configuration 1N/O-1N/C
Control Relay Features.
4 pole relays with 10A thermally rated contacts suitable for AC or DC control voltages. Low consumption coil versions with built in suppression and suitable to be used with programmable controllers are also available.
- Contacts with 10A thermal rating, suitable for use down to 17V 5mA
- Four-pole for operation with AC or DC control circuits
- Variety of auxiliary contacts, and timer modules
- Clamp terminals as standard with spring terminal, printed circuit board connection and fast-on connector types available
Applications.
- Industry, infrastructure, building.
- Simple control systems.
- Noise sensitive areas, disturbed mains supply, silent contactor.
- Compatible with programmable controller outputs, low consumption contactor.
- Switching contactor or relay coils.
- Powering control and signalling equipment.
What does the utilisation category AC1 and AC3 mean for the TeSys contactors?
Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
- AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
- AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.
What accessories are available?
- Auxiliary contact blocks with serrated wiping action
- Front mount dust tight auxiliary contact blocks
- Pneumatic time delay blocks
- Transient voltage surge suppressors
- Interface modules and electronic timers
- Mechanical latching blocks
LP5K0601BW3 TeSys K LP5K Reversing Contactor.
- Reversing contactor.
- Control applications.
- AC-3, AC-4 Category.
- Preassembled with reversing power busbar
- [Ue] rated operational voltage 690 V AC 50/60 Hz for power circuit, <= 690 V AC 50/60 Hz for signalling circuit.
- [Ie] rated operational current 6 A at <= 440 V AC AC-3 for power circuit.
- Control circuit 24 V DC (DC low consumption).
- 1 NC Auxiliary contact.
- Category III.
- Rated breaking capacity, 110 A at 415 V conforming to IEC 60947, 110 A at 440 V conforming to IEC 60947, 80 A at 500 V conforming to IEC 60947, 110 A at 220...230 V conforming to IEC 60947, 110 A at 380...400 V conforming to IEC 60947, 70 A at 660...690 V conforming to IEC 60947.
- Built-in bidirectional peak limiting diode suppressor.
- Flame resistant V1 conforming to UL 94, Requirement 2 conforming to NF F 16-101, Requirement 2 conforming to NF F 16-102.
- Safety level B10d = 1369863 cycles contactor with nominal load conforming- to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming- to EN/ISO 13849-1.
- Plate, Rail Mounting.
- Mechanical interlocking.
- Screw clamp terminals.
- Protection to IP20 conforming to VDE 0106
Approvals
UL, CSA.
Standards
BS 5424, IEC 60947, NF C 63-110, VDE 0660.
Specifications
Attribute | Value |
|---|---|
| Coil Voltage | 24 V dc |
| Number of Poles | 3 |
| Contact Voltage Rating | 690 V ac |
| Contact Current Rating | 6 A |
| Range | TeSys K |
| Series | LP5K |
| Power Rating | 1.5 kW |
| Function | Reversing |
| Normal State Configuration | 3NO |
| Auxiliary Contact Configuration | 1NC |
| Number Of Auxiliary Contacts | 1 |
| Terminal Type | Screw |
| Length | 58mm |
| Width | 90mm |
| Depth | 57mm |
| Better World Verification | Green Premium |
| Better World Product | Yes |
| Minimum Operating Temperature | -25°C |
| Mounting Style | Plate, Rail |
| Maximum Operating Temperature | +50°C |