Schneider Electric LC2D Series Contactor, 24 V dc Coil, 3-Pole, 9 A, 4 kW, 3NO, 690 V ac

TeSys D reversing Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC2D series is preassembled with reversing power busbar and has been designed for motor control or resistive load applications. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

• Built-in auxiliary contacts for added switching capability
• Pre-installed interlock
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.
Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

A reversing contactor is an assembly of two of standard contactors, with a mechanical and electrical interlock connecting them. The interlocks allow only one contactor to be closed (giving power supply to the motor) at any time.

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

EN 60947, VDE 0660

Looking for reliable bidirectional motor control? Try this contactor from Schneider Electric. As it's a reversing type, you can conveniently use it to switch power to a motor moving in either direction. Its fast-acting contacts open and close in less than a second, so you can count on it's speedy reaction time. This helps to minimise the risk of arcing and damage to connected devices. A built-in bidirectional peak limiting diode suppressor quickly blocks the path of short circuits. Screw clamp terminals allow for fuss-free wiring using only a screwdriver and achieve connections that withstand shock and vibration. This means you can put the contactor to the test in demanding industrial settings.

• Flame-retardant, so burns for a maximum of 30 seconds if it catches alight
• Supplied with a protective cover to minimise the risk of environmental damage
• Mechanical durability of 30 million cycles for reliability throughout its extended lifespan

• Pharmaceutical manufacturing
• Industrial automation
• Warehouses and packaging facilities
• Aerospace technology

Yes, for convenience you can choose to mount this device on a panel or a DIN rail.