Schneider Electric Tesys D LC1D 3 Pole Contactor, 3NO, 12 A, 5.5 kW, 230 V ac Coil

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Schneider Electric LC1D TeSys D Contactors

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Is the TeSys D range a double break pole type contactor?

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LC1D12P7 Contactor

The Schneider Electric LC1D12P7 model is a 3 pole contactor featuring a 230 V ac operating coil, with an AC-3 full load current rating of 12 A.

Specifications
Attribute Value
Coil Voltage 230 V ac
Number of Poles 3
Contact Current Rating 12 A
Power Rating 5.5 kW
Range TeSys D
Series LC1D
Normal State Configuration 3NO
Contact Voltage Rating 690 V ac
Number Of Auxiliary Contacts 2
Terminal Type Screw
Length 77mm
Minimum Operating Temperature -5°C
Width 45mm
Depth 84mm
Maximum Operating Temperature +60°C
194 Within 4 working day(s) (Global stock)
28 Within 4 working day(s) (Global stock)
Price Each
MYR 225.90
units
Per unit
1 +
MYR225.90
Related Products
Contactors have a switching voltage of 440Vac and ...
Description:
Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50 / 60Hz rated) of 4.5VA (Hold in) and 30VA (inrush). Utilisation category AC3DIN rail or screw mountingAmbient air temperature range -25 to +50°C.
Professional range of WEG contactors from the CWC ...
Description:
Professional range of WEG contactors from the CWC Series designed for switching of electric motors. The contactors are modular and compact but at the same time robust and highly reliable. Built and tested according to IEC/EN60947 and DIN VDE 0660. ...
As an alternative to screw connections a large ...
Description:
As an alternative to screw connections a large number of Siemens low voltage components are also available with cage clamp connections.,Solid, stranded and finely stranded conductors, with or without end sleeves, can be connected, where two conductors can be clamped ...
Three main polesOne N/O auxiliary contactFront and side ...
Description:
Three main polesOne N/O auxiliary contactFront and side mounted auxiliary contact blocksLocation for surge protectionDIN rail and back plate mountingManufactured to IEC947-4-1, EN60 047-4-1CE marked.