Dold 1 Pole Contactor, 1NO, 10 A, 24 V dc Coil

  • RS Stock No. 375-5163
  • Mfr. Part No. BF9250.01/001 UH=DC24V AC10A AC24-480V
  • Manufacturer Dold
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MT
Product Details

Semiconductor contactor

Semiconductor contactors for wear-free, silent switching of AC loads such as heating, motors, valves and lighting
The cost of investing in this new technology is quickly recovered where high switching rates are used
Zero-voltage switching to prevent feedback to the main power grid
Integrated temperature monitoring ensures the device is protected from damage caused by excess current
In accordance with EN 60 947-4-2, IEC 60 158-2, VDE 0660 part 109
Single-phase or 3-phase design
Control input X1 with low power consumption, e.g. for PLC control
High switching frequency coupled with long service life
Compact construction with integrated heat sink
For switching AC loads up to 480 V
Protection circuit with varistors
Temperature monitoring via LED display and semiconductor output (memory preservation)
3 LED displays
Top-hat rail mounting

Semiconductor Contactors

A range of complete ’ready to use’ devices that comprise relay and heat sink in one compact DIN rail mountable unit. Typical applications include control of non motor loads where high operating frequencies are encountered.

Specifications
Attribute Value
Coil Voltage 24 V dc
Number of Poles 1
Contact Current Rating 10 A
Normal State Configuration 1NO
Contact Voltage Rating 480 V ac
Length 85mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature 0°C
Depth 120mm
Width 22.5mm
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 688.46
units
Per unit
1 +
MYR688.46
Related Products
Climate-proof, finger safe contactor relays. RC elements, varistors, ...
Description:
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil. Size S00High degree if contact stability ...
X Start is the latest generation of Contactors, ...
Description:
X Start is the latest generation of Contactors, Overloads and Relays from Moeller, based on the tried and tested DIL series. This generation of modular components benefits from the advances in technology for motor switching and control, which in turn ...
Suitable for use in any climateScrew and snap-on ...
Description:
Suitable for use in any climateScrew and snap-on mounting onto 35mm standard mounting railIdentification number and letter for switching elements 31 EAmbient temperature during operating phase -25 → 55 °C.
Utilisation category AC1Auxiliary contact configuration one N/O, one ...
Description:
Utilisation category AC1Auxiliary contact configuration one N/O, one N/CWidth of LC1D contactors is 45mmClosing time of LC1D series is 12-22ms, opening time is 4-19msThese contactors must not be used with TeSys overload relays, interconnection units or GV2 circuit breakers.