Schneider Electric Overload Relay NO/NC, 100 VA, 24 → 48 V ac

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Schneider Electric LT3-S Range

Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also be used to monitor surface temperature.

Automatic or manual reset
Remote reset
Fault storage with the supply switched off
Fault indication
Test function

Specifications
Attribute Value
Control Voltage 24 → 48 V ac
Range TeSys
Contact Voltage Rating 250 V ac
Series LT3S
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 100 VA
Reset Method Manual
Terminal Type Cage Clamp
Width 22.5mm
Length 100mm
Depth 100mm
Operating Temperature Range -25 → +60 °C
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 2,263.94
units
Per unit
1 - 5
MYR2,263.94
6 +
MYR2,241.22
Related Products
Phase failure sensitiveTest ButtonTrip-Fault IndicationManual or automatic reset ...
Description:
Phase failure sensitiveTest ButtonTrip-Fault IndicationManual or automatic reset facilityTemp. compensated trip -20 to +55°C.
Tripping class 10 Phase failure sensitivityHand, Automatic or ...
Description:
Tripping class 10 Phase failure sensitivityHand, Automatic or manual reset selectable.
The 3RU21 thermal overload relays up to 80 ...
Description:
The 3RU21 thermal overload relays up to 80 A have been designed for current-sensitive protection of loads with normal starting.These thermal overload relays for use with Sirius Size S0 & S00 Contactors. Switch position indicator and test functionSTOP buttonSelector switch ...
Suitable for machine protection requirements where machinery may ...
Description:
Suitable for machine protection requirements where machinery may be subject to difficult starting, jamming, high resistive torque/high inertia and/or mechanical failure1 N/O and 1 N/C contactLED status indication: Voltage, Starting, Steady State, Overload, TripTrip status monitored: Over-Current, Rotor Locked, ...