TE Connectivity MATE N LOK Series Wire Seal IP56 Rated

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TE Connectivity Universal Mate-N-Lok Connector Wire Seals

TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board connections.

To achieve sealing it is necessary to use one interface seal and two wire seals per connector
Crimp contacts stock no. 366-4376 or 366-4382 must be used with these seals
Available in 2 to 15 way versions

Note

Refer to stock number 366-1901 and range for interface seals.

Approvals

CSA

TE Connectivity Universal MATE-N-LOK™ Range

Specifications
Attribute Value
Type Wire Seal
Series MATE N LOK
IP Rating IP56
Material Silicone
710 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 2.28
units
Per unit
Per Pack*
10 - 190
MYR2.28
MYR22.80
200 - 740
MYR2.03
MYR20.30
750 - 2990
MYR1.811
MYR18.11
3000 - 5990
MYR1.51
MYR15.10
6000 +
MYR1.48
MYR14.80
*price indicative
Related Products
From EDAC, a series of wire seals for ...
Description:
From EDAC, a series of wire seals for the 572 range of waterproof connectors. The silicone rubber wire seals are crimped with the contacts providing extra protection at the rear of the housing. The wire seals in the 572 range ...
Based on DIN 72585, this range of sealed ...
Description:
Based on DIN 72585, this range of sealed connectors has been developed to meet the demand for superior performance. Single piece, formed constructionTin platedWire seals are crimped individually with the contact.
A range of accessories for the Econoseal J ...
Description:
A range of accessories for the Econoseal J Mark II (+) series automotive wire connectors. All connectors are designed to be used with thin walled non-irradiated PVC cablesThough designed initially for automotive applications, Econoseal III can be used in any ...
Contacts for standard density connectors (1.6mm diameter) and ...
Description:
Contacts for standard density connectors (1.6mm diameter) and high density connectors (1.0mm diameter).Blanking pins are available for filling unused 1.6mm cavities.Use Crimp Tool stock no. 194-2264 for 1.0 and 1.6mm contacts.,Alternatively use Universal Crimp Tool Frame stock no. 848-391 with ...