Bosch Rexroth Strut Profile Base Plate, strut profile 45 mm, Groove Size 10mm

  • RS Stock No. 703-1590
  • Mfr. Part No. 3842536581
  • Manufacturer Bosch Rexroth
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Steel Base Plate

Steel base plates used for constructing supports and for separating and protective walls
Fixing screws not included (M8x20 T-bolt required - mfr. part no. 3842528715 & M8 flange nut - mfr. part no. 3842345081)

Barriers and Handrails

Easy hazardous area planning
Pre-assembled components - flexible and of modular construction
Fast on-site assembly
Attractive design
Constant protection at low costs

The modular and versatile Bosch Rexroth EcoSafe guarding system offers hazardous area protection for personnel in environments that pose a serious risk to individuals and organisations. The EcoSafe modules offer a wide range of combination possibilities and a flexible, low-cost protective system solution. The emphasis is on easy and fast assembly and the system can also be extended without any difficulty. Unlike steel systems, system upgrades or conversions pose no problem as the modules can be modified to suit changing needs at any time. The Bosch Rexroth EcoSafe protective system meets the strictest European standards for protective barriers.

The EcoSafe system offers the organisation:

Specifications
Attribute Value
Structural Element Type Strut Profile
Connector Type Base Plate
Fits Groove Size 10mm
Fits Strut Profile 45 mm
Product Family Bosch Rexroth
Material Galvanised Steel
86 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 119.14
units
Per unit
1 - 5
MYR119.14
6 - 11
MYR113.02
12 +
MYR108.47
Related Products
Slot nuts can be inserted directly into the ...
Description:
Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
For building connections or stays of optional length ...
Description:
For building connections or stays of optional length and angle.,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot ...
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
The FlexLink Rotary Joint XC allows two XC ...
Description:
The FlexLink Rotary Joint XC allows two XC structural beams to be attached to each other, allowing one of the beams to swing. The joint is intended for use in pairs, to avoid movement loads. The joint should be fastened ...