FlexLink Beam Multi-Block, strut profile 22 mm, 44 mm, Groove Size 5.5mm

  • RS Stock No. 308-0295
  • Mfr. Part No. XDAM 2
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Multi-Block

Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting the sheet material.,Screw length to be sheet thickness +22mm.,XC type also includes a push on clamp for an alternative method of holding the sheet material (suitable for sheet thickness 1 to 6mm).

Specifications
Attribute Value
Structural Element Type Beam
Connector Type Multi-Block
Fits Groove Size 5.5mm
Thread Size M5
Fits Strut Profile 22 mm, 44 mm
Product Family FlexLink
Material Polyamide
Product System XD
27 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 12.07
units
Per unit
1 - 5
MYR12.07
6 - 11
MYR11.94
12 +
MYR11.78
Related Products
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
For building connections or stays of optional length ...
Description:
For building connections or stays of optional length and angle.,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot ...
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
Use to connect beam end to beam side, ...
Description:
Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in ...