Bosch Rexroth Strut Profile Quick Connector, strut profile 40 mm, 45 mm, 50 mm, 60 mm, Groove Size 10mm

  • RS Stock No. 401-377
  • Mfr. Part No. 3842 535 466
  • Manufacturer Bosch Rexroth
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Quick, Single Bolt Type, Strut Connector

Quick connectors for creating right angles with 8mm and 10mm profiles. Easy and fast to connect, these connectors are ideal for the creation of temporary structures.

Fast assembly
Excellent accessibility for tools during assembly
Available as horizontal / vertical
Machining Required : 11mm barrel, 11mm through-hole
17mm barrel, 17mm through-hole

//media.rs-online.com/t_line/L390024-05.jpg
//media.rs-online.com/t_line/L420688-03.gif
Specifications
Attribute Value
Structural Element Type Strut Profile
Connector Type Quick Connector 90 Degree
Fits Groove Size 10mm
Thread Size D17
Fits Strut Profile 40 mm, 45 mm, 50 mm, 60 mm
Product Family Bosch Rexroth
Material Galvanised Steel
Product System MGE
26 In Global stock for delivery within 4 - 6 working days
Price 1 Bag of 10
MYR 263.88
Bag(s)
Per Bag
Per unit*
1 - 5
MYR263.88
MYR26.388
6 - 11
MYR256.18
MYR25.618
12 +
MYR250.90
MYR25.09
*price indicative
Related Products
Joint for rigid or movable 30x30, 40x40 or ...
Description:
Joint for rigid or movable 30x30, 40x40 or 45x45 profile connections at any angle of your choice within 182°designLINE Joint with special silver paint for an attractive high-quality design for all MGE fixtures. Also available in economical die-cast finish.With a ...
For straight extending of 30x30, 40x40, 45x45 and ...
Description:
For straight extending of 30x30, 40x40, 45x45 and 50x50 strut profilesdesignLINE End connector with special silver paint for an attractive high-quality design for all MGE fixtures. Also available in economical die-cast finish.No profile end finishing preparation30x30 profile needs core hole ...
For building stable and neat framework corners.The beams ...
Description:
For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fittings can be placed into the T-slots and clamped against the slot with the set screws provided.
Use to connect beam end to beam side, ...
Description:
Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in ...