Silicon Labs EFM12PG12 Pearl Gecko MCU RF MCU Starter Kit SLSTK3402A
- RS Stock No.:
- 134-7237
- Mfr. Part No.:
- SLSTK3402A
- Manufacturer:
- Silicon Labs
- RS Stock No.:
- 134-7237
- Mfr. Part No.:
- SLSTK3402A
- Manufacturer:
- Silicon Labs
Legislation and Compliance
Product Details
EFM32 Pearl Gecko Starter Kits, Silicon Labs
Pearl Gecko microcontrollers feature a 32-bit ARM Cortex-M4 processor core. They offer a wide array of peripherals and a cryptographic hardware engine supporting AES, ECC, and SHA. With low current active mode and short wake-up times, Pearl Gecko microcontrollers are perfect for battery powered applications and other low-energy systems. Two versions are offered with different MCU specifications and different peripherals.
• EFM32PG1B200F256GM48 MCU with 256KB Flash memory, 32KB RAM (SLSTK3401A)
• EFM32PG12B500F1024GL125 MCU with 1MB Flash memory, 256KB RAM (SLSTK3402A)
• Integrated SEGGER J-Link debugger
• Advanced Energy Monitor
• USB Mini-B socket for debug and Virtual COM port
• Debug header for external debug emulator connection
• 1.28in 128 x 128pixel Memory LCD display
• 2 x Capacitive touch buttons (SLSTK3401A only)
• Capacitive touch slider (SLSTK3402A only)
• 2 x User LEDs
• 2 x User pushbuttons
• Reset pushbutton
• On-board Si7021 Relative Humidity/Temperature sensor
• On-board Inductive LC sensor for LESENSE demonstration (SLSTK3402A only)
• Coin-cell holder for CR2032 battery
• Breakout pads for access to MCU GPIO pins
• 20-pin expansion header for add-on boards
• Powered from coin-cell or USB
• EFM32PG12B500F1024GL125 MCU with 1MB Flash memory, 256KB RAM (SLSTK3402A)
• Integrated SEGGER J-Link debugger
• Advanced Energy Monitor
• USB Mini-B socket for debug and Virtual COM port
• Debug header for external debug emulator connection
• 1.28in 128 x 128pixel Memory LCD display
• 2 x Capacitive touch buttons (SLSTK3401A only)
• Capacitive touch slider (SLSTK3402A only)
• 2 x User LEDs
• 2 x User pushbuttons
• Reset pushbutton
• On-board Si7021 Relative Humidity/Temperature sensor
• On-board Inductive LC sensor for LESENSE demonstration (SLSTK3402A only)
• Coin-cell holder for CR2032 battery
• Breakout pads for access to MCU GPIO pins
• 20-pin expansion header for add-on boards
• Powered from coin-cell or USB
RS Product Codes
Supplied with
EFM32PG1B200F256GM48 (RS 922-4797) Pearl Gecko MCU mainboard
CR2032 coin cell battery
USB Cable
EFM32 Getting Started Card
CR2032 coin cell battery
USB Cable
EFM32 Getting Started Card
This item is Lithium cell / battery product (or contains Lithium cells / batteries) which needs to be shipped by sea freight. There will be extension of lead time (around 90 days) for global stock.
EFM32 Gecko Microcontrollers
Silicon Labs microcontrollers target energy sensitive applications, including smart metering, gas/energy/water metering, remote sensing, building automation, security systems, portable health/fitness equipment and smart accessories.
Powerful ARM Cortex-M 32-bit processor cores
Short wake-up time from energy saving modes
Ideal for use with energy harvesting systems
Short wake-up time from energy saving modes
Ideal for use with energy harvesting systems
Specifications
Attribute | Value |
|---|---|
| RF Technology | RF MCU |
| Kit Classification | Starter Kit |
| Kit Name | EFM12PG12 Pearl Gecko MCU |