Fluke 771 Clampmeter, 100mA dc

  • RS Stock No. 287-642
  • Mfr. Part No. FLUKE 771
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Fluke 771 mA Process Clamp Meter

Need more hours in your day? Save time by not breaking the loop on 4-20 mA signal measurements with the Fluke 771 Process Clamp Meter.

Are you spending time:

•Taking mA measurements by removing a wire and breaking the loop
•Calling the control room to isolate a loop
•Testing analog input/output on a console
•Troubleshooting devices with mA inputs and outputs
•Repairing intermittent or erratic 4-20 mA loops
•Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 771 clamp meters will help you:

Measure mA signals for PLC and control system analog I/O without breaking the loop
• Measures low level dc current
• Correlate process indication with real physical value

Measure output signals from transmitters without breaking the loop
• Maintain and troubleshoot process and automation equipment without breaking the loop
• No disruption to the process

Detachable clamp with extension cable
• Measurements in tight locations
• Enables measurements in difficult situations

Measurement Spotlight
• Illuminates hard to see wires in dark enclosures
• Measurement process is easier and quicker

Measure up to 99.9 mA range non-contact
• Wide range of measurements
• Measures 10 to 50 mA signals in older control systems

Automatic power off
• After 15 minutes and 2 minute automatic off for backlight and spotlight
• Saves battery life

Features

• Best in class 0.2% accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without “breaking the loop”
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements

Supplied with

2 AA batteries, soft carry case and user manual.

Fluke Clamp Meter

The Fluke milliamp process clamp meter measures current between 4mA and 20mA loops without breaking the loop or bringing down the system.

Features and Benefits


Best in class 0.2% accuracy
• 0.01mA resolution and sensitivity
• Measure mA signals for PLC and control system analogue I/O
• Dual backlit display with both, mA measurement and per cent of 4mA to 20mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with an extension cable for measurements in tight locations
• Measure between 10mA and 50mA signals in older control systems using the 99.9mA range
• Automatically change the 4mA to 20 mA output for remote testing
• Power-saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements

Applications


Petrochemicals
• Oil and gas
• Food and beverage
• Pharmaceuticals

Certifications


IP40
• EN61326-1

Specifications
Attribute Value
Absolute Maximum AC Current Measurement -, - A ac
Absolute Maximum DC Current Measurement 99.9mA dc
Model Number 771
DC Current Measurement Resolution 10uA
Best DC Current Accuracy ±1% + 5 Digits
Clamp Meter Type Milliamp Process Clamp
Maximum Conductor Size 4.5mm
Battery Life 20 h
Weight 260g
Height 38mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Jaw Capacity Busbars 4.5mm
Dimensions 212 x 59 x 38mm
Battery Type AA
Width 59mm
Display Type LCD
Power Source Battery
Length 212mm
26 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 4,488.75
units
Per unit
1 +
MYR4,488.75
Related Products
The Fluke 345 measures a wide range of ...
Description:
The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three phase electrical loads. With a bright colour display to see waveforms and trends, a low-pass filter to remove high frequency noise, and ...
RS Pro ICM 2000N is a great value ...
Description:
RS Pro ICM 2000N is a great value clampmeter which uses Hall effect technology for precise measurement of ac and dc current. Large 3 digits LCDAccurate DC/AC digital clamp meter for currentDC 2500 A, AC 2100 A (True RMS)Auto-range for ...
Mini current clamp (AC/DC). Small size doesn’t mean ...
Description:
Mini current clamp (AC/DC). Small size doesn’t mean small features. The Beha-Amprobe AMP-25-EUR Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction, the AMP-25-EUR is a must-have professional troubleshooting tool for commercial electricians ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall ...
Description:
Standard: IEC 1010-1 Cat. III, deg. 2. Hall effect current probes allowing measurement of direct or alternating currents, without disturbing or breaking the circuit.Multimeter output (PAC 10 and 11).Voltage output.Zero adjustment using a thumb wheel (PAC 10) or automatically by ...