ITT Cannon T3P Series, 13A Male Solder Circular Connector Contact, Wire size 16 AWG

  • RS Stock No. 329-8682
  • Mfr. Part No. 192900-0633/T3P16MS1LY
  • Manufacturer ITT Cannon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Solder Cup Contact

Suitable for 500 mating cycles

ITT TNM Shielded

The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.

RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types

Specifications
Attribute Value
Gender Male
Wire Size 16 AWG
Termination Method Solder
Series T3P
Current Rating 13A
Contact Type Signal
Length 26.19mm
Contact Plating Gold
Contact Material Brass
Maximum Contact Resistance 5mΩ
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Mounting Type Cable Mount
7320 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 5)
MYR 5.296
units
Per unit
Per Pack*
5 - 95
MYR5.296
MYR26.48
100 - 195
MYR4.766
MYR23.83
200 +
MYR4.294
MYR21.47
*price indicative
Related Products
Crimp contacts for use with female receptacles from ...
Description:
Crimp contacts for use with female receptacles from the Molex ML-XT Sealed Connection System and Molex XRC Sealed Connectors. The copper alloy terminals have a tin over nickel plating. These size 16 female crimp contacts have a 12A current capacity ...
Crimp contact for use in Amphenol C 16-3 ...
Description:
Crimp contact for use in Amphenol C 16-3 circular connectors. Cable and chassis mount inserts may be keyed to prevent incorrect connection between typesCan facilitate cable to cable and cable to chassis connectionAll have a pre-mating earth designSupplied with strain ...
Copper alloy with gold over nickel plating.,The PCB ...
Description:
Copper alloy with gold over nickel plating.,The PCB pin contacts protrude 5.6mm from the back of the connector to allow direct connection to a PCB. Plugs and receptacle may be fitted with either crimp pins or socketsIntegral cable clampBayonet locking ...
Suitable for UTO Series, see e.g. 557-925. Flammability ...
Description:
Suitable for UTO Series, see e.g. 557-925. Flammability rating UL94V0 2 VDE 0110 Group C versions 3 and 7 waysMoulded keyways ensure error free matingStandard shell sizes and contact arrangementsHigh conductive copper alloyGold flash or tin plate optionsIncorporating stainless steel ...