Ceramic Heating Element, 400mm, 200 W, 230 V ac

  • RS Stock No. 374-3075
  • Mfr. Part No. RCF 200
  • Manufacturer Acim Jouanin
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.

Strip Heating Elements

Note

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

Approvals

UL Recognised; CSA Certified

Warning

  • For reasons of safety the heater block and/or heater sheath must be bonded to earth
Specifications
Attribute Value
Heating Element Form Formable Coil Heaters
Power Rating 200 W
Supply Voltage 230 V ac
Length 400mm
Width 3.7mm
6 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 489.86
units
Per unit
1 +
MYR489.86
Related Products
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. 230V ac supply voltage Two M5 x 30mm mounting bolts on the rear7mm leadsSuitable for medium wave infrared ...
The RS Pro silicone heater mats are designed ...
Description:
The RS Pro silicone heater mats are designed for areas where standard heating methods are difficult to apply. All the mats are self-adhesive and have etched foil elements embedded into a glass cloth supported rubber compound. These features provided you ...
The RS Pro silicone heater mats are designed ...
Description:
The RS Pro silicone heater mats are designed for areas where standard heating methods are difficult to apply. All the mats are self-adhesive and have etched foil elements embedded into a glass cloth supported rubber compound. These features provided you ...
Preformed silicone heater mats are thin and lightweight ...
Description:
Preformed silicone heater mats are thin and lightweight and have a low thermal mass, hence their rapid heat up characteristics and fast response to temperature control. The mats wide operating temperature range, flexibility and superb electrical properties give them a ...