RS PRO, 2A Cartridge Fuse, 12.7 x 29mm

  • RS Stock No. 413-787
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

"Pullcap" Cartridge Fuses

These RS PRO cartridge fuses are general purpose fuse links ideal for protecting circuits in areas such as industrial installations. These fuses have a rated voltage of 415 V ac and are suitable for use on systems with voltages up to 457 V ac.
Fuses are less expensive and react faster than a circuit breaker. However circuit breakers can be reset after they trip but a fuse will have to be replaced once it blows.
RS PRO cartridge fuse packs are available in a range of current ratings with varying resistance values to suit all your requirements. This range is reliable for a broad range of applications.
This range includes the following types with current ratings 2A to 32A:
413-787 2A
413-793 4A
413-800 6A
413-816 10A
413-822 16A
413-838 20A
413-844 25A
413-850 32A


Breaking Capacity 80kA at 415Vac/40kA at 250Vdc
Fusing Factor Class Q1 (approx. 1·5)
BS 88 1975 and ASTA certified

Typical applications:
These fuses can be used to protect circuits with high faults levels such as:
Industrial installation
Cable protection
General purpose

Additional Information

What size is it?
12.7mm x 29mm

What are fuses used for?
• For the protection of components and equipment from costly damage caused by overcurrent
• To isolate sub-systems from the main system once a fault has appeared

What is an overcurrent?
It is a setting where a circuit experiences a current that is higher than the normal operating current.

What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit.

Attribute Value
Current Rating 2 A
Fuse Size 12.7 x 29mm
Voltage Rating 415 V ac
Application Category GG
Series MD
500 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 17.369
Per unit
Per Pack*
10 - 40
50 - 240
250 - 490
500 - 990
1000 +
*price indicative
Related Products
ASO series fuses and FSO series fuseholders designed ...
ASO series fuses and FSO series fuseholders designed to protect DC applications from the potentially devastating effects of low short circuits and overvoltage conditions. The fuse and fuseholder are for use in grid or off-grid solar strings, inverters, battery charges ...
Pre-wired connector - cable 5 m - for ...
Pre-wired connector - cable 5 m - for passive splitter box - with 8 channels. M12 connection offer4 or 8 channel versionChannel status signalling conformity to market standardsDifferent programmable controller connection modes24 V commons separation possible. ...
Lawson Type 'ME' and 'MF' fuse links are ...
Lawson Type 'ME' and 'MF' fuse links are for use in single or three phase house service cut-outs or similar installations. The standardised BS 1361 breaking capacity of these fuse-links is 33kA at 0.3p.f. However to cater for increasing fault ...
Engineered to Protect in Photovoltaic Applications.Mersen offer a ...
Engineered to Protect in Photovoltaic Applications.Mersen offer a range of photovoltaic fuses and fuse holders that are designed specifically for this application. This range benefits from enhanced fuse construction which allow for continuous temperature and current cycling withstand.Protect your off-grid ...