Legrand Trapeze Hanger Stainless Steel Support Rail, 50 mm Width

  • RS Stock No. 163-3087
  • Mfr. Part No. LTH50S
  • Manufacturer Legrand
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for each width and method of fi†ing is given in the table

Specifications
Attribute Value
Accessory Type Trapeze Hanger
Material Stainless Steel
Duty Type Heavy Duty, Light Duty, Medium Duty
Width 50 mm
Corrosion Protection Type Stainless Steel
Series LTH
For Use With M10 Threaded Rod
Tray and Basket Type Cable Tray
7 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 34.26
units
Per unit
1 - 9
MYR34.26
10 +
MYR30.85
Related Products
The Cablofil International compact cantilever arm cable tray ...
Description:
The Cablofil International compact cantilever arm cable tray is a universal mounting arm from the CM series. It is made of 316 stainless steel material. This arm is compact, easy to use. • Medium duty• Provides corrosion protection• Support steel ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It is made of 316 stainless steel material and is 300mm wide. It used in pairs on side rails for steel cable tray. Plated with ecologic zinc, ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...