Legrand Cantilever Arm Bracket Hot Dip Galvanised Steel Cable Tray Fixing Plate, 75 mm Width, 65mm Depth

  • RS Stock No. 163-3072
  • Mfr. Part No. LCA75G
  • Manufacturer Legrand
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specifications
Attribute Value
Accessory Type Cantilever Arm Bracket
Material Hot Dip Galvanised Steel
Duty Type Heavy Duty, Light Duty, Medium Duty
Depth 65mm
For Use With Flat Surface Tray, Swiftrack Channel
Width 75 mm
Tray and Basket Type Cable Tray
Series LCA
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 34.80
units
Per unit
1 - 9
MYR34.80
10 +
MYR31.38
Related Products
PVC cable tray covers available in lengths of ...
Description:
PVC cable tray covers available in lengths of 3 metres. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
Pre-galvanised medium duty couplersCouplers are required for joining ...
Description:
Pre-galvanised medium duty couplersCouplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drillingMRFC standard couplers are supplied in pairsMRFC standard coupler is supplied singly.