Martindale FD650 Fuse Finder, Cable Detection Depth 10cm CAT III 300 V, Maximum Safe Working Voltage 600V

  • RS Stock No. 719-0908
  • Mfr. Part No. FD650
  • Manufacturer Martindale
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Elite Professional Fuse Finder Kit Martindale FD650

The multi-purpose version of the popular FD550. Supplied in a robust case complete with transmitter and receiver, additional features include a 13A plug top lead for sockets and fused test lead set with crocodile clips for junction boxes, terminals and lighting circuits.

Supplied with

13A plug in transmitter, Elite receiver & instructions, rugged hard carry case, TL93 leads with crocodile clips, 13A mains adaptor.

Martindale Elite Fuse Finder Kit

The Martindale elite fuse finder makes identifying poorly labelled fuses and breakers easy without the need to power down each circuit to identify the one you need to work on. The fuse finder kit is supplied with TL 83 leads with croc clips for use on lighting circuits and a mains adaptor for use on 13A sockets. This fuse finder can operate in two modes - automatic, which has a memory and auto-adjusting sensitivity for foolproof identification and manual mode, which allows very rapid fuse finding using the bar graph. It helps in easy identification of poorly labelled fuses and breakers without powering down each circuit.
Supplied with:
13A plug-in the transmitter, Elite receiver & instructions, rugged hard carry case, TL93 leads with crocodile clips, 13A mains adaptor.

Features and Benefits

• LED display
• Operating temperature ranges between -10°C and 40°C
• The receiver has both fast manual mode and auto threshold mode set by a single sweep over the board
• Trace from light fittings
• Trace from one distribution board to another
• Trace fuse and breakers from sockets
• Tracing depth for fuse assignment: 0 -10cm, depending on local conditions

Applications

• Electrical areas
• Embedded systems

Certifications

• CAT III 300 V
• IP20 rated

Specifications
Attribute Value
Display Type LED
Cable Detection Depth 10cm
Meter Type Fuse Finder
Safety Category CAT III 300 V
Battery Type 9V
Power Source Battery, Mains
Includes Receiver, Transmitter
Maximum Frequency 70Hz
Maximum Operating Temperature +40°C
Maximum Safe Working Voltage 600V
Minimum Frequency 30 Hz
Minimum Operating Temperature -10°C
Minimum Safe Working Voltage 40V
Model Number p FD650
Safety Category Level CAT III
Safety Category Voltage 300V
Plug Type Type G - British 3-pin
27 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 930.89
units
Per unit
1 +
MYR930.89
Related Products
Designed to verify the presence of load current, ...
Description:
Designed to verify the presence of load current, voltage and resistence, etc.The small bodies and jaws fit perfectly in your hand and a large backlit display is easy to read.Test lead mA range with high 1 mA resolution for HVAC ...
The FLIR CM46 clamp meter is designed for ...
Description:
The FLIR CM46 clamp meter is designed for commercial and residential electricians. Featuring both AC/DC measurement, the meter is equipped with a bright backlit display for use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately ...
The Megger digital clamp meter is a highly ...
Description:
The Megger digital clamp meter is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of AC-DC electrical systems and equipment. Meter can measure AC/DC voltage. The jaw opening diameter for the clamp meter ...
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up ...
Description:
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up to 500V phase to phase or 300V phase to earth CAT III or 600V CAT II30mA and 300mA ranges for leakage current measurement0.01mA resolution on 30mA range30A and 300A ranges for power ...