TE Connectivity Straight Cable Boot Black, LFH Polyolefin, 43mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Zero Halogen (Lipped) - 202K1 and 222K1 Series

Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting.

Features and benefits

• Low smoke Low emission properties
• Excellent sealing and strain relief
• Dielectric strength: 15MV/m

Note

If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots

Standards

DEF STAN 59/97 issue 3 Type DF

//media.rs-online.com/t_line/L279479-01.gif
Specifications
Attribute Value
Type Straight Cable Boot
Inside Diameter Primary 43mm
Inside Diameter Secondary 25mm
Adhesive Lined No
Material LFH Polyolefin
Number of Breakouts 1
Colour Black
Minimum Operating Temperature -30°C
Maximum Operating Temperature +105°C
Shrunk Diameter Primary 28.2mm
Shrunk Diameter Secondary 9.9mm
95 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 160.70
units
Per unit
1 - 14
MYR160.70
15 - 49
MYR143.03
50 +
MYR102.79
Related Products
VG standard-compliant heatshrink connector terminal housing with inner ...
Description:
VG standard-compliant heatshrink connector terminal housing with inner lip, angledSuitable for connecting circular connectors on thin cablesEnsure mechanical protection and strain relief.
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Moulded parts that provide durable strain relief, protection ...
Description:
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and ...