RS PRO 6bar Air Blow Gun, 1/4in Air Inlet (BSP)
- RS Stock No.:
- 806-779
- Manufacturer:
- RS PRO
17 In Local stock for delivery in 2-3 working days, delivery time may vary for certain locations or FTZ
33 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR560.09
| Units | Per Unit |
| 1 - 4 | MYR560.09 |
| 5 + | MYR460.94 |
- RS Stock No.:
- 806-779
- Manufacturer:
- RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- NZ
Product Details
RS PRO Air Blow Gun – 6bar
RS PRO is proud to introduce this superb blow gun, created to extract chips from blind holes with depths of up to 450 mm. This deep-hole vacuum gun features a plastic probe that propels high-pressure air into gaps and holes, effectively dislodging particles. The primary nozzle then securely captures and removes the dislodged particles. Notably, the nozzle is enclosed to prevent any escaped particles, ensuring safety by minimizing the risk of injury.
Features and Benefits
- Deep hole vacuum gun
- Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deep
- Plastic probe jets high-pressure air into the hole to dislodge particles
- Safely sucked away by the main nozzle
- Main nozzle shrouded to prevent particles escaping and causing injury
- 1/4in BSP Inlet
- Max working pressure 6 bar
- Accessories available separately
Caution
These non-restricted type blow guns must only used on air lines which have a pressure regulator set at a maximum of 30 psi.
Warning
To avoid risk of injury, these guns must only be used with either the dust bag or conveying hose.
Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.
Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.
Warning
To avoid risk of injury, these guns must only be used with either the dust bag or conveying hose
Specifications
Attribute | Value |
|---|---|
| Air Inlet BSP | 1/4in |
| Working Pressure | 6bar |
| Output Pressure | 6bar |
| Type | Air Blow Gun |
| Model Number | VM22D/H |