Gedore Bearing Puller GEDORE 9.00/2

  • RS Stock No. 237-748
  • Mfr. Part No. GEDORE 9.00/2
  • Manufacturer Gedore
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Hydraulic Puller Kit

3 leg / 2 leg puller combination with a spread of 160mm and a reach of 75mm
3 slim line legs to make up 3 leg / 2 leg puller with a spread of 160mm and a reach of 150mm, particularly suitable for tasks where space is limited
Maximum pulling force 10Nm
Operation: the pressure applied to the force screw is multiplied by a small hydraulic chamber at the end of the force screw to give safe and easy removal pressure

Kit consists of:

Specifications
Attribute Value
Hydraulic Force 10N
Operation Hydraulic
3 In Global stock for delivery within 4 - 6 working days
Price 1 Kit
MYR 2,839.13
Kit(s)
1 +
MYR2,839.13
Related Products
Bearing separator: for removing taper roller and ball ...
Description:
Bearing separator: for removing taper roller and ball bearings, inner bearing races and other tightly seated or thin walled parts, range 5 - 60mmSeparator puller: for use with the bearing separator, the tension bolts are screwed into the threaded holes ...
Bearing Separator: for removing taper roller and ball ...
Description:
Bearing Separator: for removing taper roller and ball bearings, inner bearing races and other tightly seated or thin walled parts, range 5 - 60mmSeparator Puller: for use with the bearing separator, the tension bolts are screwed into the threaded holes ...
The SKF TMHP 10E hydraulic jaw puller kit ...
Description:
The SKF TMHP 10E hydraulic jaw puller kit allows for the effortless dismounting of bearings up to 100 kN. With self locking arms, the jaw puller minimises the risk of slipping even when under load. • Hydraulic spindle with safety ...
The SKF TMBS E series of back pullers ...
Description:
The SKF TMBS E series of back pullers are easily inserted between the bearing and shoulder on the shaft. They have a spring loaded centre point allowing easier puller centring and a safety valve minimising puller overload. • TMBS 100E ...