LED, Flashing Beacon Solista Maxi Series, Red, Surface Mount, 9 → 60 V dc

  • RS Stock No. 180-733
  • Mfr. Part No. SOLM/R/R/D
  • Manufacturer Fulleon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

LED Beacons - Solista Maxi

An enhancement of the standard Solista. This LED beacon has an economy and a performance mode. In economy mode it can require as little as 3mA, or it can be switched to attain much higher light outputs where visibility is the greater concern. For even greater effectiveness a double flash sequence can be selected.

3 user selectable output settings
Wide operating voltage range
Synchronisation flash
Single or double flash
Lockable bases

Supplied with

Lens, base

Warning

  • This product exceeds the requirements of En54-3 but is not designed to meet EN54-23. Where the Construction Product Directive or Regulation (CPD/CPR) is a country requirement, it cannot be used, legally, for the purpose of alerting room occupants to a Fire Alarm condition. For Countries where CPD/CPR does not apply, this note should be disregarded.
Specifications
Attribute Value
Supply Voltage 9 → 60 V dc
Light Effect Flashing
Lens Colour Red
Mounting Style Surface Mount
Bulb Type LED
Current Type DC
Base Diameter 93mm
Housing Colour Red
Lamp Included Yes
Series Solista Maxi
Multifunction Yes
Height 83mm
Minimum Temperature -10°C
Maximum Temperature +55°C
12 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 208.07
units
Per unit
1 - 5
MYR208.07
6 - 11
MYR194.13
12 +
MYR188.88
Related Products
All are of polycarbonate construction. Flash rate (where ...
Description:
All are of polycarbonate construction. Flash rate (where applicable) on all types is 1Hz. Operating voltages (ac) are ± 10%. Current consumption variable depending on operating voltage. Rated to IP65 (unless stated). Operating temperature range: -20 → 40°C. Suitable for ...
In normal operation, 8 LEDs will flash at ...
Description:
In normal operation, 8 LEDs will flash at 0.6HZ. When connected in reverse polarity, 1 LED will flash at 0.4HzLow current consumptionFully protected to IP67 when installedCurrent consumption is 800μA with one LED illuminated, and 25mA with eight illuminatedWhen one ...
Choice of four operating modes Flashing, Rotating single ...
Description:
Choice of four operating modes Flashing, Rotating single bar or Double bar and Steady on Beacon incorporates 144 extra bright output LEDsDIN base 3 point fix with M20 conduit optionLong life 100000 hours typical.
Description:
Rated for Zone 0,1 & 2, Gas group IICArray of 6 high intensity LEDsSingle or double flash @ 1Hz or 2HzInput overload and reverse current protectionOperating temperature: -40 to +60°C.