MG Chemicals Carbon Adhesive Epoxy, 50 ml Tub

  • RS Stock No. 918-5021
  • Mfr. Part No. 8329TCS-50ML
  • Manufacturer MG Chemicals
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CA
Product Details

MG Chemicals 8329 Slow Cure Conductive Adhesives

The MG Chemicals 8329TCS is a slow cure thermal conductive epoxy adhesive with excellent bonding strength and good thermal transfers is used for thermal management of high-powered electronics and LEDs. Once cured, the epoxy adhesive is inert under normal conditions so resists water and salt exposure.

Feature and Benefits

Easy to mix 1:1 mix ratio
Long shelf life
Adheres to most electronic substrates
Behaves like a 1-part adhesive for the length of a work shift
Once cured resists thermal and mechanical shocks in electronic assemblies

Typical Applications

Use as a die attach for electrical and electronics
Heat sink bonding
Use as a high-powered LED adhesive that maximises the lifetime of LEDs by dissipating their heat

Note

For substrate substances with weak adhesion strengths, surface preparation such as sanding or pre-coating with a suitable primer sometimes improves adhesion.

Specifications
Attribute Value
Adhesive Type Conductive Adhesive
Product Form Liquid
Package Type Tub
Package Size 50 ml
Cure Time 20 min
Maximum Operating Temperature +200°C
Specific Gravity 2.41
Operating Temperature Range -70 → +200 °C
Odour Slight
Minimum Operating Temperature -70°C
Temporarily out of stock - back order for despatch when stock is available
Price Each
Was MYR556.09
MYR 256.21
units
Per unit
1 +
MYR256.21
Related Products
Rapid epoxy for bonding your projects with minimal ...
Description:
Rapid epoxy for bonding your projects with minimal effort and time. This quick set two-part epoxy adhesive is supplied in two separate tubes for easy and clean application. Ensuring you accurately create a strong clear bond within minutes, without the ...
Versatile durable two-part epoxy compounds for maintenance and ...
Description:
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Fast curing epoxy putty for permanent emergency ...
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is ...
Description:
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer ...
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.