RS PRO, 25 ml Yellow Cartridge Acrylic Adhesive for Metal, Plastic

  • RS Stock No. 918-1401
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

RS Pro Structural Epoxy Adhesives

The RS Pro epoxy resin is an excellent adhesive for creating permanent bonds on various materials. The solvent free two part adhesive cures at room temperature and has high impact and peel strength.

Features and Benefits

Maintains good strength when cured at room temperature
Solvent free
Resistant to water and a range of chemicals
Cures at room temperature

Typical Applications

The RS Pro epoxy adhesive is used in the electronics industry, transportation industry and for general maintenance and repairs.
Use on plastics and metals such as aluminium and steel.

Note

Ensure that the materials to be bonded are clean and dry. Make sure that there is no loose material, grease and oil present.

Specifications
Attribute Value
Adhesive Type Acrylic Adhesive
Material Compatibility Metal, Plastic
Colour Yellow
Package Type Cartridge
Package Size 25 ml
Cure Time 20 min @ +100°C, 60 min @ +75°C
Special Features Solvent Free
Odour Slight
Chemical Composition Epoxy Resin
68 Within 2 working day(s)
Within 7 working day(s) (Global stock)
Price Each
MYR 69.36
units
Per unit
1 - 14
MYR69.36
15 - 39
MYR67.43
40 +
MYR65.46
Related Products
Bond plastics, wood and painted or primed metal ...
Description:
Bond plastics, wood and painted or primed metal surfaces with 3M™ Scotch-Weld™ EPX™ Polyurethane Adhesive DP609. Our fast curing, flexible structural adhesive has great strain capability, high toughness and ability to retain high strength over a wide temperature range.3M™ Scotch-Weld™ ...
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.
3M™ Scotch-Weld™ Low Odour Acrylic Adhesives are high ...
Description:
3M™ Scotch-Weld™ Low Odour Acrylic Adhesives are high performance, two-part acrylic adhesives with lower odour. ToughenedLow odourWork life of approximately 10 minutesGood shear strengthStructural strength in about 18 minutesHigh peel and impact strength10:1 mix ratioIncreased cure speed with applied heatFor ...
Self-adhesive, non-hardening and non-conductive black mass for sealing ...
Description:
Self-adhesive, non-hardening and non-conductive black mass for sealing and insulatingFor modelling, adapts to various formsCan be removed easily and without leaving residueBonds to rubber, plastics, metals, wood, plaster and cement.