RS PRO Silicone Thermal Gap Filler, 30 min Cure, 2W/mK, 30 ml Cartridge

  • RS Stock No. 193-8247
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Silicone Thermal Gap Filler - Light Blue 2W/m K

Introducing silicone thermal putty from RS PRO, a range of thermally conductive adhesives ideal for creating an excellent bond between components whilst offering high thermal conductivity. The thermal putty cartridges can be dispensed effectively via RS PRO silicone dispensing guns, allowing you to dispense an accurate amount with precision. These formable gap fillers are perfect for ensuring components that contain small gaps or are not perfectly flat remain securely bonded, whilst dissipating heat to prevent them from overheating and breaking down. With RS PRO silicone thermal putty, cure times are achievable as quickly as 30 minutes, allowing you to quickly and efficiently bond components together with ease.

Features and Benefits

  • No flowing when set, ensuring clean and efficient application

  • Maintains good contact with components for a secure seal

  • Good thermal conductivity preventing overheating and loss of energy

  • Compatible with RS PRO dispensing gun for quick and easy application

  • Suitable for use in a range of applications


Dispensable thermal interface materials such as gap fillers and adhesives are used in a range of applications to create a secure bond between components, whilst preventing air from escaping through small gaps. Silicone thermal putty adhesives are available in a range of colours and varying levels of thermal conductivity, depending on the applications required. Thermally conductive adhesive gap fillers are ideal for use in areas such as:

  • Communications equipment

  • Automotive electronics

  • Small office, and networking equipment

  • Cooling modules


What dispensing gun is this compatible with?

RS Stock No. 1938246 – RS PRO 30 ml Dispenser Gun

Other options

RS Stock No. 1938247 - Thermal Putty - Light Blue 2W/m K
RS Stock No. 1938248 - Thermal Putty - Pink 3W/m K
RS Stock No. 1938249 - Thermal Putty - Grey 5W/m K
RS Stock No. 1938250 - Thermal Putty - Grey 7W/m K

Attribute Value
Package Type Cartridge
Package Size 30 ml
Cure Time 30 min
Maximum Operating Temperature +200°C
Operating Temperature Range -40 → +200 °C
Minimum Operating Temperature -40°C
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 74.11
Per unit
1 - 14
15 - 39
40 +
Related Products
Versatile durable two-part epoxy compounds for maintenance and ...
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Fast curing epoxy putty for permanent emergency ...
3MTM Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue and ...
3MTM Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue and DP8010NS Blue are two-part, acrylic-based adhesives (10:1 ratio by volume) that can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene and TPO’s without special surface preparation. These adhesives ...
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is ...
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer ...
3M™ Scotch-Weld™ Acrylic Adhesive DP810 is a two-part, ...
3M™ Scotch-Weld™ Acrylic Adhesive DP810 is a two-part, 1:1 mix ratio, toughened structural adhesive with significantly less odour than most acrylic adhesives. DP810 has excellent shear and peel strength with good impact resistance and durability. DP810 quickly bonds most metals, ...