ON Semiconductor UAA2016PG AC/DC Driver, Zero Voltage Switching Triac 8-Pin, PDIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Zero Voltage Switching Controllers

Zero-voltage switching Triac trigger/driver ciruits which facilitate RFI-free power regulation of resistive loads.

The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.

Specifications
Attribute Value
Controller Type Zero Voltage Switching Triac
Number of Outputs 1
Width 6.6mm
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Dimensions 10.16 x 6.6 x 3.44mm
Length 10.16mm
Height 3.44mm
Maximum Input Voltage -8 V
Maximum Operating Temperature +85 °C
Maximum Output Current 150mA
Maximum Output Voltage -4.5 V
Minimum Operating Temperature -20 °C
Operating Temperature Range -20 → +85 °C
Output Voltage Range -6.5 → -4.5 V
Input Voltage Range -10 → -8 V
Minimum Input Voltage -10 V
Minimum Output Voltage -6.5 V
46 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 6.18
units
Per unit
1 - 9
MYR6.18
10 - 49
MYR5.60
50 - 99
MYR5.00
100 - 249
MYR4.50
250 +
MYR3.99
Packaging Options:
Related Products
The Infineon Off-line SMPS Current mode controller comes ...
Description:
The Infineon Off-line SMPS Current mode controller comes complete with integrated 650V CoolMOS and start up cell (frequency jitter mode). The PMIC BiCMOS technology has a 26V VCC range that covers the changes in the auxiliary supply when the CV/CC ...
The Infineon Off-line SMPS Current mode controller comes ...
Description:
The Infineon Off-line SMPS Current mode controller comes complete with integrated 650V CoolMOS and start up cell (frequency jitter mode). The PMIC BiCMOS technology has a 26V VCC range that covers the changes in the auxiliary supply when the CV/CC ...
The NCP4305 is high performance driver tailored to ...
Description:
The NCP4305 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies. Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi ...
Synchronous rectifiers are used to drive power MOSFETs ...
Description:
Synchronous rectifiers are used to drive power MOSFETs that replace the rectification diodes in the secondary side of SMPS. Therefore, providing high efficiency especially in low-output-voltage, high-current power supplies.