Screwdriver Sets

Screwdriver Sets


Screwdriver sets are the most common tools used by professionals and DIY enthusiasts. Screwdrivers are hand held devices use to install and uninstalling fasteners or screws. Screwdrivers rely upon the physical strengths of the operator to deliver accurate force when turning clockwise or anti clockwise via screwdriver handle.


Screwdriver set types


We offer a range of screwdriver sets from VDE, Interchangeable, precision and electronic. The different types of screwdriver are primarily down to the drive tip shape required for a specific head type of a given screw. However, we offer a range of screwdrivers that are application specific.


Screwdriver Construction


For each screwdriver in the set they are made of up of three main parts;


Handle


The screwdriver handle which is used for gripping has changed material over time and has increased in variety for different applications. The handle is generally shaped to prevent rolling on flat surfaces and can also be ergonomic to improve comfort when gripping. Most commonly the handles are made of a composite of hard plastic such as cellulose acetate and rubber and can be covered in a soft material such as a thermoplastic rubber to improve grip.


Shaft or shank


The screwdriver shaft or shank is commonly made of strong steel to ensure that bending or twisting deformation does not occur when applying force. The shaft is rounded or has a hexagonal shape so that a spanner or wrench can be used to apply increased torque. The shaft is generally different colouration and material to the drive tip which can be interchangeable.


Drive tip


The drive tip can be an integrated part of the shank if it is not detachable or it can be an interchangeable part known as a driver bit similar to drill bits. A cordless drill can be used as an electric screwdriver in this capacity. Drive tips can be made in a variety of metals and alloys such as:


  • Titanium

  • Stainless steel

  • Tool grade steel or S2

  • High speed steel or HSS

  • Chromium-vanadium-molybdenum or CVM tool steel

What should I avoid doing?


Do not hold the screw in one hand while using the screwdriver. If the screwdriver slips out of the slot you run the risk of serious hand injury.

Never use an incorrect screwdriver on screws, you will damage the head of the screw making the task of removal even greater.


Are they available separately?


Direct replacement screwdrivers are available for certain brands, please browse our Screwdrivers.


Application Information


Screwdrivers and Screwdriver Sets are used by electricians, engineers and mechanics, they are a vital component during assembly of furniture, mechanical repair or general maintenance around the home.


...
Read more Read less

Filters

Viewing 341 - 358 of 358 products
Results per page
Description Price Screwdriver Type Number of Pieces Tip Type ESD Safe Tip Size
RS Stock No. 833-0788
Mfr. Part No.STHT0-62631
BrandStanley
MYR190.55
Each
units
Precision 6 Phillips, Slotted - Slotted: 1, 1.2, 1.5, 1.8mm; Phillips: PH000, PH00
RS Stock No. 310-2929
Mfr. Part No.1-750
BrandBernstein
MYR861.34
Each
units
Interchangeable 13 Hexagon, Philis, Slotted - Slotted: 0.9 x 0.3; 1.3 x 0.3; 1.5 x 0.3; 1.8 x 0.3; 1.95 x 0.35; 2.5 x 0.7; 3 x 0.3 mm; Hexagon: 1.95; 2.45 mm; Phillips: PH00; PH0; 2.4 x 0.8 mm
RS Stock No. 769-1739
Mfr. Part No.AEX.J2
BrandFacom
MYR377.64
Each
units
Precision 8 Torx - T5; T6; T7; T8; T9; T10; T15; T20
RS Stock No. 638-8340
Mfr. Part No.032063
BrandWera
MYR200.15
1 Set
Set(s)
Standard 6 Slotted; Pozidriv; Phillips - Slotted: 3; 6.5; Pozidriv: PZ1; PZ2; Phillips: PH1; PH2
RS Stock No. 176-4156
Mfr. Part No.00 20 12 V02
BrandKnipex
MYR356.30
Each
units
VDE 6 Phillips, Slotted - 3, 4, 5.5, 6.5, PH1, PH2
RS Stock No. 847-7994
Mfr. Part No.1902857
BrandGedore
MYR300.45
Each
units
Precision 6 Torx - T10, T5, T6, T7, T8, T9
RS Stock No. 185-6053
Mfr. Part No.T49162D
BrandCK
MYR286.10
Each
units
VDE 7 Phillips, Slotted - PH:0 x 60, 1 x 80 & 2 x 100 mm, Slotted Flared:4 x 75, 5.5 x 100, 6.5 x 150 mm, Slotted Parallel: 3 x 75 mm
RS Stock No. 136-7132
Mfr. Part No.41245
BrandWiha Tools
MYR281.13
Each
units
VDE 6 Torx - T10, T15, T20, T25, T30, T40
RS Stock No. 772-4387
Mfr. Part No.2150-2160 PZ-06
BrandGedore
MYR301.58
Each
units
Standard 6 Pozidriv, Slotted - Pozidriv: PZ1; PZ2, Slotted: 4; 5.5; 6.5; 8 mm
RS Stock No. 136-7155
Mfr. Part No.40350
BrandWiha Tools
MYR1,312.33
Each
units
Precision 51 Hexagon, Phillips, Slotted, Torx - -
RS Stock No. 185-6052
Mfr. Part No.T49283PD
BrandCK
MYR313.60
Each
units
VDE 5 Pozidriv, Slotted - T49243-1 PZ1 x 100mm x 1, T49243-2 PZ2 x 100mm x 1, T49244-035 SL3.5 x 100mm x 1, T49244-040 SL4.0 x 100mm x 1, T49244-055 SL5.5 x 125mm x 1
RS Stock No. 177-1364
Mfr. Part No.STHT60032-0
BrandStanley
MYR209.70
Each
units
VDE 10 Phillips, Pozidriv, Slotted - -
RS Stock No. 136-7141
Mfr. Part No.41294
BrandWiha Tools
MYR175.29
Each
units
VDE 4 Phillips, Slotted - -
RS Stock No. 177-1363
Mfr. Part No.STHT60031-0
BrandStanley
MYR141.57
Each
units
VDE 7 Pozidriv, Slotted - -
RS Stock No. 2508983997
Mfr. Part No.SDR11
MYR174.61
Each
units
- - - - -
RS Stock No. 2508984473
Mfr. Part No.99PS50
MYR395.58
Each
units
- - - - -
RS Stock No. 2508985410
Mfr. Part No.PS88
MYR193.65
Each
units
- - - - -
RS Stock No. 2508985218
Mfr. Part No.XST5
MYR235.26
Each
units
- - - - -
Related Products
Innovative Chiseldriver screwdriver set from Wera capable of ...
Description:
Innovative Chiseldriver screwdriver set from Wera capable of driving, loosening seized screws and chiselling due to the pound-thru blade and built in impact cap. Wera’s Kraftform ergonomic handle for extra grip and pressure with optimal contact zones resulting in increased ...
RS Pro 39 Piece Slotted/Phillips screwdriver and bit ...
Description:
RS Pro 39 Piece Slotted/Phillips screwdriver and bit set. Offers reformulated steel composition coupled with optimised tip geometry ensures resistance to even higher torque levels. Improved handle ergonomics enable even higher force transfer with less power. • Precision hardened Chrome-Vanadium-Molybdenum ...
The perfect kit for professionals or enthusiast looking ...
Description:
The perfect kit for professionals or enthusiast looking for a comprehensive set of tools. Build with high quality in mind and made from the best chrome-molybdenum and chrome-vanadium steel to provide long life and safe service. Various bits ensure comfortable ...
Ideal for ESD applications where recommended torque settings ...
Description:
Ideal for ESD applications where recommended torque settings are important. 0.8-2.0NmTorque infinitely adjustable with Torque-Setter setting tool (supplied)Ergonomic multi-component handle, made of ESD-safe dissipative materialAccuracy ±6%, traceable to national standardsStandards IEC 61340-5-1EN ISO 6798, BS EN ...