Screwdriver Sets

Screwdriver Sets


Screwdriver sets are the most common tools used by professionals and DIY enthusiasts. Screwdrivers are hand held devices use to install and uninstalling fasteners or screws. Screwdrivers rely upon the physical strengths of the operator to deliver accurate force when turning clockwise or anti clockwise via screwdriver handle.


Screwdriver set types


We offer a range of screwdriver sets from VDE, Interchangeable, precision and electronic. The different types of screwdriver are primarily down to the drive tip shape required for a specific head type of a given screw. However, we offer a range of screwdrivers that are application specific.


Screwdriver Construction


For each screwdriver in the set they are made of up of three main parts;


Handle


The screwdriver handle which is used for gripping has changed material over time and has increased in variety for different applications. The handle is generally shaped to prevent rolling on flat surfaces and can also be ergonomic to improve comfort when gripping. Most commonly the handles are made of a composite of hard plastic such as cellulose acetate and rubber and can be covered in a soft material such as a thermoplastic rubber to improve grip.


Shaft or shank


The screwdriver shaft or shank is commonly made of strong steel to ensure that bending or twisting deformation does not occur when applying force. The shaft is rounded or has a hexagonal shape so that a spanner or wrench can be used to apply increased torque. The shaft is generally different colouration and material to the drive tip which can be interchangeable.


Drive tip


The drive tip can be an integrated part of the shank if it is not detachable or it can be an interchangeable part known as a driver bit similar to drill bits. A cordless drill can be used as an electric screwdriver in this capacity. Drive tips can be made in a variety of metals and alloys such as:


  • Titanium

  • Stainless steel

  • Tool grade steel or S2

  • High speed steel or HSS

  • Chromium-vanadium-molybdenum or CVM tool steel

What should I avoid doing?


Do not hold the screw in one hand while using the screwdriver. If the screwdriver slips out of the slot you run the risk of serious hand injury.

Never use an incorrect screwdriver on screws, you will damage the head of the screw making the task of removal even greater.


Are they available separately?


Direct replacement screwdrivers are available for certain brands, please browse our Screwdrivers.


Application Information


Screwdrivers and Screwdriver Sets are used by electricians, engineers and mechanics, they are a vital component during assembly of furniture, mechanical repair or general maintenance around the home.


...
Read more Read less

Filters

Viewing 1 - 20 of 46 products
Results per page
Description Price Screwdriver Type Number of Pieces Tip Type ESD Safe Tip Size
RS Stock No. 494-058
Mfr. Part No.5-62-573
BrandStanley
MYR268.05
Each
units
VDE 10 Flared; Phillips; Pozidriv - Flared: 2.5; 3.5; 5.5 mm; Pozidriv: PZ0; PZ1; PZ2; Phillips: PH0; PH1; PH2
RS Stock No. 125-2053
Mfr. Part No.STHT0-60212
BrandStanley
MYR79.14
Each
units
Standard 12 Phillips, Pozidriv, Slotted, Torx - -
RS Stock No. 665-8359
Mfr. Part No.5-65-441
BrandStanley
MYR190.59
Each
units
VDE 6 Parallel; Phillips - Parallel: 2.5; 3.5; 5.5 mm; Phillips: PH1; PH2
RS Stock No. 665-8361
Mfr. Part No.0-65-492
BrandStanley
MYR182.13
Each
units
Precision 6 Pozidriv; Parallel; Phillips - Pozidriv: PZ0; Parallel: 2.5; 3; 3 mm; Phillips: PH00; PH0
RS Stock No. 125-2052
Mfr. Part No.STHT0-60211
BrandStanley
MYR77.35
Each
units
Standard 10 Phillips, Pozidriv, Slotted - -
RS Stock No. 125-2161
Mfr. Part No.0-66-052
BrandStanley
MYR61.69
Each
units
Precision 6 Phillips, Slotted - 1.4 mm, 2 mm, 2.4 mm, 3 mm, PH0, PH1
RS Stock No. 125-2054
Mfr. Part No.STHT0-60213
BrandStanley
MYR92.41
Each
units
Standard 20 Phillips, Pozidriv, Slotted, Torx - -
RS Stock No. 125-2051
Mfr. Part No.STHT0-60210
BrandStanley
MYR96.33
Each
units
Standard 8 Phillips, Slotted - -
RS Stock No. 665-8374
Mfr. Part No.1-66-039
BrandStanley
MYR39.78
Each
units
Precision 6 Pozidriv, Slotted - Phillips: 1.4; 2; 2.4; 3 mm; Pozidriv: PZ0; PZ1
RS Stock No. 125-2050
Mfr. Part No.STHT0-60209
BrandStanley
MYR78.73
Each
units
Standard 6 Phillips, Slotted - -
RS Stock No. 125-2155
Mfr. Part No.0-65-443
BrandStanley
MYR187.21
Each
units
VDE 6 Pozidriv, Slotted - 2.5 mm, 3.5 mm, 5.5 mm, PZ1, PZ2
RS Stock No. 833-0797
Mfr. Part No.STHT0-62632
BrandStanley
MYR222.78
Each
units
Precision 6 Phillips, Slotted - Slotted: 2, 2.5, 3mm; Phillips: PH000, PH00, PH0
RS Stock No. 833-0807
Mfr. Part No.FMHT0-62689
BrandStanley
MYR143.49
Each
units
Interchangeable 12 Flat, Phillips, Pozidriv, Torx - Flat: 5 mm, Flat: 6.5 mm, Flat: 8 mm, Phillips: PH1, Phillips: PH2, Phillips: PH3, Pozidriv: PZ1, Pozidriv: PZ2, Pozidriv: PZ3, Torx: T10, Torx: T15, Torx: T20
RS Stock No. 125-2049
Mfr. Part No.STHT0-60208
BrandStanley
MYR74.79
Each
units
Standard 6 Phillips, Slotted - -
RS Stock No. 125-2069
Mfr. Part No.XTHT0-62694
BrandStanley
MYR296.11
Each
units
VDE 5 Slotted; Pozidriv - 3.5 x 7.7 mm, 5.5 x 150 mm, PZ1 x 100 mm, PZ2 x 125 mm
RS Stock No. 833-0810
Mfr. Part No.FMHT0-62691
BrandStanley
MYR148.73
Each
units
Interchangeable 12 Flat - Flat: 5 mm, Flat: 6.5 mm, Flat: 8 mm, Phillips: PH1, Phillips: PH2, Phillips: PH3, Pozidriv: PZ1, Pozidriv: PZ2, Pozidriv: PZ3, Torx: T10, Torx: T15, Torx: T20
RS Stock No. 776-9743
Mfr. Part No.0-65-424
BrandStanley
MYR245.20
Each
units
Engineers 9 Flared, Parallel, Pozidriv - -
RS Stock No. 833-0801
Mfr. Part No.FMHT0-62690
BrandStanley
MYR141.30
Each
units
Interchangeable 12 Flat, Phillips, Pozidriv, Torx - Flat: 5 mm, Flat: 6.5 mm, Flat: 8 mm, Phillips: PH1, Phillips: PH2, Phillips: PH3, Pozidriv: PZ1, Pozidriv: PZ2, Pozidriv: PZ3, Torx: T10, Torx: T15, Torx: T20
RS Stock No. 833-0772
Mfr. Part No.STHT0-62628
BrandStanley
MYR75.91
Each
units
Precision 4 Torx - T5, T6, T7, T8
RS Stock No. 125-2058
Mfr. Part No.FMHT0-62062
BrandStanley
MYR114.06
Each
units
Engineers 6 Phillips; Slotted; Torx - 3 mm, 4 mm, 5.5 mm, PH1, PH2, T25