Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.


Where can a Bearing Puller be used?


One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


How Bearing Pullers work


Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.


Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.

  • Reversible for internal or external uses

  • Two or three claw design

  • Spring loaded centre point

...
Read more Read less

Filters

Viewing 61 - 80 of 86 products
Results per page
Description Price Capacity Hydraulic Force Operation Number of Pieces Case Material
RS Stock No. 124-8466
Mfr. Part No.TMMR80F
BrandSKF
MYR392.53
Each
units
83 (External) mm, 97 (Internal) mm - Hand - -
RS Stock No. 125-3889
Mfr. Part No.1.06/1A1-B
BrandGedore
MYR420.16
Each
units
140 (External) mm, 180 (Internal) mm - Lever Press - -
RS Stock No. 125-3892
Mfr. Part No.1.06/2A1-B
BrandGedore
MYR759.86
Each
units
210 (External) mm, 260 (Internal) mm - Lever Press - -
RS Stock No. 125-3888
Mfr. Part No.1.06/11-B
BrandGedore
MYR396.34
Each
units
100 (External) mm, 140 (Internal) mm - Lever Press - -
RS Stock No. 885-5322
Mfr. Part No.729101/400MPA
BrandSKF
MYR19,776.95
Each
units
200 cm³ 400MPa Hand - -
RS Stock No. 125-3883
Mfr. Part No.1.04/2A-B
BrandGedore
MYR890.53
Each
units
200 (External) mm, 260 (Internal) mm - Lever Press - -
RS Stock No. 124-8453
Mfr. Part No.TMMR350F
BrandSKF
MYR939.42
Each
units
354 mm - Hand - -
RS Stock No. 124-8467
Mfr. Part No.TMMR160F
BrandSKF
MYR679.50
Each
units
163 (Internal) mm, 164 (External) mm - Hand - -
New
RS Stock No. 184-9003
Mfr. Part No.U.30619IM
BrandFacom
MYR835.45
Each
units
- - - - -
RS Stock No. 125-3890
Mfr. Part No.1.06/21-B
BrandGedore
MYR686.55
Each
units
170 (External) mm, 220 (Internal) mm - Lever Press - -
RS Stock No. 349-7233
BrandRS PRO
MYR204.03
Each
units
9/32 → 3 in - Gear - -
RS Stock No. 125-3897
Mfr. Part No.1.07/21-B
BrandGedore
MYR994.33
Each
units
160 (External) mm, 220 (Internal) mm - Lever Press - -
RS Stock No. 125-3895
Mfr. Part No.1.06/31-B-HSP2
BrandGedore
MYR2,865.96
Each
units
- 7.5t Hydraulic - -
RS Stock No. 237-748
Mfr. Part No.GEDORE 9.00/2
BrandGedore
MYR2,839.13
1 Kit
Kit(s)
- 10N Hydraulic - -
RS Stock No. 300-6203
Mfr. Part No.U.14A
BrandFacom
MYR283.96
Each
units
35 mm - Hand - -
RS Stock No. 300-6219
Mfr. Part No.U.14L
BrandFacom
MYR348.84
Each
units
45 mm - Hand - -
RS Stock No. 124-8460
Mfr. Part No.TMMR250F
BrandSKF
MYR889.38
Each
units
254 mm - Hand - -
RS Stock No. 847-8230
Mfr. Part No.1656937
BrandGedore
MYR241.30
Each
units
80 mm - Lever Press - -
RS Stock No. 124-8451
Mfr. Part No.TMMP3X300
BrandSKF
MYR1,370.27
Each
units
300 mm - Mechanical - Carbon Steel
RS Stock No. 737-2829
Mfr. Part No.71140211
BrandSTAHLWILLE
MYR511.64
Each
units
150 mm - Gear - -
Related Products
A 3 piece set designed for the safe ...
Description:
A 3 piece set designed for the safe removal of tight fitting ball bearings, bearing races, bushings and shaft seals. The internal extractor is inserted into the bearing and the spindle screwed in. The turned out shoulders will press outwards ...
2 Leg puller with quick release hooksSafe and ...
Description:
2 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
3 Leg puller with quick release hooksSafe and ...
Description:
3 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
Enerpac hydraulic puller sets contain both grip puller ...
Description:
Enerpac hydraulic puller sets contain both grip puller and cross bearing puller sets making them suitable for all pulling and pushing jobs in maintenance and repair. The puller sets are manufactured from forged steel for a long service life and ...