Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.


Where can a Bearing Puller be used?


One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


How Bearing Pullers work


Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.


Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.

  • Reversible for internal or external uses

  • Two or three claw design

  • Spring loaded centre point

...
Read more Read less

Filters

Viewing 41 - 60 of 85 products
Results per page
Description Price Capacity Hydraulic Force Operation Number of Pieces Case Material
RS Stock No. 300-6247
Mfr. Part No.U.35
BrandFacom
MYR761.56
Each
units
15 → 75 mm - Gear - -
RS Stock No. 300-6269
Mfr. Part No.U.35L
BrandFacom
MYR884.48
Each
units
15 → 75 mm - Gear - -
RS Stock No. 300-6231
Mfr. Part No.U.302
BrandFacom
MYR482.79
Each
units
80 mm - Gear - -
RS Stock No. 123-0247
Mfr. Part No.10504635
BrandIrwin
MYR172.78
Each
units
- - - 5 -
RS Stock No. 124-8454
Mfr. Part No.TMMR60F
BrandSKF
MYR294.02
Each
units
68 (External) mm, 87 (Internal) mm - Hand - -
RS Stock No. 737-2826
Mfr. Part No.71161001
BrandSTAHLWILLE
MYR356.74
Each
units
- - Gear - -
RS Stock No. 124-8462
Mfr. Part No.TMMR40F
BrandSKF
MYR268.82
Each
units
48 (External) mm, 67 (Internal) mm - Hand - -
RS Stock No. 669-8206
Mfr. Part No.U.232J2
BrandFacom
MYR946.98
Each
units
30 → 60 mm, 60 → 122 mm - Gear 2 -
RS Stock No. 237-798
Mfr. Part No.GEDORE 9.00/1
BrandGedore
MYR1,075.05
1 Kit
Kit(s)
- - Gear 3 -
RS Stock No. 125-3887
Mfr. Part No.1.04/HP3A-B
BrandGedore
MYR1,750.25
Each
units
350 (External) mm, 420 (Internal) mm - Lever Press - -
RS Stock No. 922-6226
Mfr. Part No.TMMR 8F/SET
BrandSKF
MYR6,598.32
1 Kit
Kit(s)
- - Hand 10 -
RS Stock No. 125-3895
Mfr. Part No.1.06/31-B-HSP2
BrandGedore
MYR2,865.96
Each
units
- 7.5t Hydraulic - -
RS Stock No. 124-8466
Mfr. Part No.TMMR80F
BrandSKF
MYR392.53
Each
units
83 (External) mm, 97 (Internal) mm - Hand - -
RS Stock No. 300-6275
Mfr. Part No.U.35P
BrandFacom
MYR643.83
Each
units
55 mm - Gear - -
RS Stock No. 737-2829
Mfr. Part No.71140211
BrandSTAHLWILLE
MYR511.64
Each
units
150 mm - Gear - -
RS Stock No. 125-3896
Mfr. Part No.1.07/11-B
BrandGedore
MYR525.85
Each
units
90 (External) mm, 140 (Internal) mm - Lever Press - -
RS Stock No. 125-3897
Mfr. Part No.1.07/21-B
BrandGedore
MYR994.33
Each
units
160 (External) mm, 220 (Internal) mm - Lever Press - -
RS Stock No. 124-8467
Mfr. Part No.TMMR160F
BrandSKF
MYR679.50
Each
units
163 (Internal) mm, 164 (External) mm - Hand - -
RS Stock No. 124-8452
Mfr. Part No.TMMR200F
BrandSKF
MYR744.54
Each
units
204 mm - Hand - -
RS Stock No. 125-3884
Mfr. Part No.1.04/3A-B
BrandGedore
MYR1,557.60
Each
units
350 (External) mm, 420 (Internal) mm - Lever Press - -
Related Products
The SKF TMHC 110E is a hydraulic puller ...
Description:
The SKF TMHC 110E is a hydraulic puller kit, combining a jaw puller and a strong back puller with up to 100 kilonewton pulling power. The versatile puller kit facilitates safe and easy dismounting in various applications. • High load ...
A 3 piece set designed for the safe ...
Description:
A 3 piece set designed for the safe removal of tight fitting ball bearings, bearing races, bushings and shaft seals. The internal extractor is inserted into the bearing and the spindle screwed in. The turned out shoulders will press outwards ...
3 Leg puller with quick release hooksSafe and ...
Description:
3 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
Enerpac hydraulic puller sets contain both grip puller ...
Description:
Enerpac hydraulic puller sets contain both grip puller and cross bearing puller sets making them suitable for all pulling and pushing jobs in maintenance and repair. The puller sets are manufactured from forged steel for a long service life and ...