Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.


Where can a Bearing Puller be used?


One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


How Bearing Pullers work


Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.


Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.

  • Reversible for internal or external uses

  • Two or three claw design

  • Spring loaded centre point

...
Read more Read less

Filters

Viewing 21 - 40 of 86 products
Results per page
Description Price Capacity Hydraulic Force Operation Number of Pieces Case Material
RS Stock No. 122-2297
Mfr. Part No.BHP3751G
BrandEnerpac
MYR31,621.47
Each
units
- 30t Hydraulic - -
RS Stock No. 124-8431
Mfr. Part No.TMHP10E
BrandSKF
MYR3,329.16
Each
units
- - Hydraulic 15 -
RS Stock No. 349-7299
BrandRS PRO
MYR93.95
Each
units
100 mm - Lever Press - -
RS Stock No. 349-7312
BrandRS PRO
MYR109.27
Each
units
200 mm - Lever Press - -
RS Stock No. 434-2566
BrandRS PRO
MYR212.57
Each
units
50 mm - Hand 2 -
RS Stock No. 845-8353
Mfr. Part No.TMMP 3X185
BrandSKF
MYR827.04
Each
units
185 mm 2.7t Hand - High Quality Carbon Steel
RS Stock No. 349-7306
BrandRS PRO
MYR137.98
Each
units
150 mm - Lever Press - -
RS Stock No. 189-538
Mfr. Part No.TMIP 7-28
BrandSKF
MYR2,348.36
1 Kit
Kit(s)
7 → 9 mm, 10 → 12 mm, 15 → 17 mm, 20 → 28 mm - Hand 6 -
RS Stock No. 236-7664
Mfr. Part No.U.20BPB
BrandFacom
MYR2,151.66
Each
units
260 mm - Gear - -
RS Stock No. 190-601
Mfr. Part No.TMHC 110 E
BrandSKF
MYR5,373.16
1 Kit
Kit(s)
- 11.2t Hydraulic - -
RS Stock No. 237-827
Mfr. Part No.GEDORE 1.07/2-E
BrandGedore
MYR1,121.17
Each
units
160 mm - Lever Press - -
RS Stock No. 124-8470
Mfr. Part No.TMSC-10
BrandSKF
MYR629.57
Each
units
- - Hand - Steel
RS Stock No. 308-0087
Mfr. Part No.U.306
BrandFacom
MYR1,026.20
Each
units
- - Gear - -
RS Stock No. 122-2295
Mfr. Part No.BHP1752
BrandEnerpac
MYR14,883.33
Each
units
- 8t Hydraulic - -
RS Stock No. 489-3402
Mfr. Part No.10504634
BrandIrwin
MYR189.97
Each
units
- - Hand - -
RS Stock No. 300-6269
Mfr. Part No.U.35L
BrandFacom
MYR884.48
Each
units
15 → 75 mm - Gear - -
RS Stock No. 237-811
Mfr. Part No.GEDORE 1.06/ 2-E
BrandGedore
MYR743.69
Each
units
160 mm - Gear - -
RS Stock No. 737-2810
Mfr. Part No.71080011
BrandSTAHLWILLE
MYR841.70
Each
units
100 mm - Gear - -
RS Stock No. 669-8206
Mfr. Part No.U.232J2
BrandFacom
MYR946.98
Each
units
30 → 60 mm, 60 → 122 mm - Gear 2 -
RS Stock No. 737-2835
Mfr. Part No.71050010
BrandSTAHLWILLE
MYR600.94
Each
units
22 mm - Hand - -
Related Products
A 3 piece set designed for the safe ...
Description:
A 3 piece set designed for the safe removal of tight fitting ball bearings, bearing races, bushings and shaft seals. The internal extractor is inserted into the bearing and the spindle screwed in. The turned out shoulders will press outwards ...
2 Leg puller with quick release hooksSafe and ...
Description:
2 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
Enerpac hydraulic puller sets contain both grip puller ...
Description:
Enerpac hydraulic puller sets contain both grip puller and cross bearing puller sets making them suitable for all pulling and pushing jobs in maintenance and repair. The puller sets are manufactured from forged steel for a long service life and ...
Series of external grip 2- and 3-clamp extractors.Small-capacity ...
Description:
Series of external grip 2- and 3-clamp extractors.Small-capacity extractors feature a self-tightening device to facilitate fitting. Features thin clamps, a compact design and small screw head to perform extractions in tight spaces.