Tile & Glass Drill Bits

Coming in a range of different shapes and sizes, specifically the Tile Drill Bit is best used when trying to drill through tricky tile surfaces where a normal drill bit may crack and damage the tile. Materials of the drill bit varies, usually coming with a diamond tip, or tempered steel both having their advantages. Diamond coated tips are more applicable to tough surfaces, making them perfect for things like tile or stone. The same applies to tempered steel which may be more suitable with such materials like steel, but do great on tile also.

...
Read more Read less

Filters

Viewing 1 - 14 of 14 products
Results per page
Description Price Diameter Material
RS Stock No. 569-732
Mfr. Part No.131.000.600
BrandKeil
MYR18.33
Each
units
6mm Tempered Tool Steel
RS Stock No. 760-0657
Mfr. Part No.2608587155
BrandBosch
MYR229.08
Each
units
6mm Diamond Tipped
RS Stock No. 569-855
Mfr. Part No.131.000.500
BrandKeil
MYR21.34
Each
units
5mm Tempered Tool Steel
RS Stock No. 569-792
Mfr. Part No.131.000.800
BrandKeil
MYR19.69
Each
units
8mm Tempered Tool Steel
RS Stock No. 760-0672
Mfr. Part No.2608620216
BrandBosch
MYR510.72
Each
units
35mm Diamond Tipped
RS Stock No. 569-865
Mfr. Part No.131.001.000
BrandKeil
MYR25.59
Each
units
10mm Tempered Tool Steel
RS Stock No. 760-0679
Mfr. Part No.2608620215
BrandBosch
MYR451.84
Each
units
30mm Diamond Tipped
RS Stock No. 569-736
Mfr. Part No.131.000.400
BrandKeil
MYR21.68
Each
units
4mm Tempered Tool Steel
RS Stock No. 760-0650
Mfr. Part No.2608620212
BrandBosch
MYR385.08
Each
units
15mm Diamond Tipped
RS Stock No. 760-0666
Mfr. Part No.2608620213
BrandBosch
MYR430.90
Each
units
21mm Diamond Tipped
RS Stock No. 760-0654
Mfr. Part No.2608587156
BrandBosch
MYR293.22
Each
units
8mm Diamond Tipped
RS Stock No. 760-0663
Mfr. Part No.2608620211
BrandBosch
MYR354.51
Each
units
12mm Diamond Tipped
RS Stock No. 760-0660
Mfr. Part No.2608620214
BrandBosch
MYR432.21
Each
units
25mm Diamond Tipped
RS Stock No. 420-6606
Mfr. Part No.562
BrandDremel
MYR89.79
Each
units
3.2mm -
Related Products
Countersinks manufactured from premium quality high-speed steel for ...
Description:
Countersinks manufactured from premium quality high-speed steel for increased hardness/toughness, improved cutting edge strength and extended tool life. These counter sinks are designed for the production of 90° countersinks in most metals and features ground flats for positive location in ...
Hammer drill with TURBOKEIL centre point and MS5 ...
Description:
Hammer drill with TURBOKEIL centre point and MS5 spiralsChrome-nickel-molybdenum steel, shot-peened and austemperedPerfect spot-drilling and optimum drilling results, even in reinforced concreteOptimum power transmission and controlled clearing of drilling dustSuitable for all hammer drills with SDS-Plus and HILTI ...
Drill with special cutting geometry and diamond-cut carbide ...
Description:
Drill with special cutting geometry and diamond-cut carbide tipMulti-purpose; suitable for virtually all materials, including stone, concrete, concrete, steel, but also porcelain, ceramic, glass, wood and PVCAsymmetric spiral design with straight flute entrySpecial conveying spiral with micro-surface ...
• Hammer drill with TURBOKEIL centre point and ...
Description:
• Hammer drill with TURBOKEIL centre point and MS5 spirals• Chrome-nickel-molybdenum steel, shot-peened and austempered• Perfect spot-drilling and optimum drilling results, even in reinforced concrete• Optimum power transmission and controlled clearing of drilling dust• Suitable for all ...