Punch Sets

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metal working, a set of punch tools allows the operator to drive objects into the material, or form an impression on a work piece.
Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.
The RS range of punch sets includes several different types to suit your needs.
Centre Punch
A common type of punch with a semi blunted end. This is typically used to mark a ’centre’ for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
Drift Punch
Sometimes referred to as a pokey, this punch tool is often used for enlarging preciously made holes. It can also be used for aligning holes prior to bolting.
Parallel Pin Punch
A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
Spring Pin Punch
Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches, and are specially shaped to remove roll pins without causing damage or becoming jammed.
Wad Punch
Wad punches have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
Anti-Vibration
With shock absorbing rubber handle, this punch not only offers the user maximum safety and comfort, but also prevents clipping.

...
Read more Read less

Filters

Viewing 1 - 20 of 68 products
Results per page
Description Price Overall Length Shank Diameter Number Of Pieces Number of Pieces Point Angle Punch Type
RS Stock No. 494-076
Mfr. Part No.4-18-299
BrandStanley
MYR196.72
Each
units
Starter Punch: 140; Centre Punch: 101; 114; Pin Punch: 152; Cold Chisel: 141; 152; 171 mm - - 12 - -
RS Stock No. 282-782
Mfr. Part No.J2
MYR482.07
Each
units
4 4/8 → 6 in 1/4 → 7/16 in - 12 - -
RS Stock No. 626-1497
BrandRS PRO
MYR78.13
Each
units
40 mm, 50 mm 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm - 6 - Drift
RS Stock No. 381-4903
BrandRS PRO
MYR159.28
1 Set
Set(s)
4 in 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in - 8 - Parallel Pin
RS Stock No. 282-805
Mfr. Part No.J46
MYR1,600.91
Each
units
4 3/4 → 10 in 3/16 → 7/8 in - 26 - -
RS Stock No. 541-7223
BrandRS PRO
MYR177.29
Each
units
- - 10 - - Wad
RS Stock No. 452-9634
Mfr. Part No.217.GJ1
BrandFacom
MYR652.68
1 Box of 1
Box(es)
60; 40; 100; 20; 20 mm Steel Tips: 10; 12; 14; 16; 18: Brass Tips: 12; 16; 20: Polyamide Tips: 12; 16; 20: Brass Tips For Extension: 12; 16; 18; Polyamide Tip For Extension: 12; 16; 18 mm 19 - - Anti-Vibration
RS Stock No. 264-2426
Mfr. Part No.47A
BrandStanley
MYR271.13
1 Set
Set(s)
4-3/8; 4-13/16; 5-1/4; 5-9/16; 5-7/8; 6-3/8; 6-3/4 in 1/4; 1/4; 5/16; 5/16; 3/8; 7/16; 1/2 in - 7 - -
RS Stock No. 381-4896
BrandRS PRO
MYR90.06
1 Set
Set(s)
4 in - 5 - - Centre
RS Stock No. 600-896
BrandRS PRO
MYR120.97
1 Set
Set(s)
47 mm, 57 mm, 67 mm - - 6 - Spring Pin
RS Stock No. 494-086
Mfr. Part No.4-18-226
BrandStanley
MYR151.29
Each
units
152 mm - - 6 - -
RS Stock No. 505-8688
BrandRS PRO
MYR119.56
Each
units
150 mm - - 6 - Parallel Pin
RS Stock No. 456-3634
BrandRS PRO
MYR92.11
1 Set
Set(s)
Flat Cold Chisel: 150; Flat Cold Chisel: 125; Crosscut chisel: 125 mm Centre Punch: 4; Taper Punch: 3; Taper Punch: 4 mm 6 - - -
RS Stock No. 701-0568
BrandRS PRO
MYR174.05
1 Set
Set(s)
Flat Chisel: 125; Cross Head Chisel: 125; Rivet Punch (x2): 120; Centre Punch: 125 mm 10 mm 5 - - Anti-Vibration
RS Stock No. 733-738
Mfr. Part No.351WRS
BrandEclipse
MYR124.04
1 Set
Set(s)
100 mm - - 4 - Centre
RS Stock No. 875-4752
BrandRS PRO
MYR82.07
Each
units
105 mm - 5 - - Centre
RS Stock No. 875-4764
BrandRS PRO
MYR99.38
Each
units
105 mm 1/16 in, 1/4 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in - 8 - Parallel Pin
RS Stock No. 530-722
Mfr. Part No.MODM.CG
BrandFacom
MYR665.68
Each
units
- Drift Punches: 2; 3; 4; 5; 6; 8; Nail Punches: 4; 5; 6; 8 mm - 11 - -
RS Stock No. 484-748
BrandRS PRO
MYR176.37
1 Set
Set(s)
150 mm - 5 - - Parallel Pin
RS Stock No. 701-0562
BrandRS PRO
MYR162.04
1 Set
Set(s)
120 mm 10 mm 5 - - Drift
Related Products
Contents: 3 flat chisels; 15, 20, 25mm blade ...
Description:
Contents: 3 flat chisels; 15, 20, 25mm blade width, 1 Cape chisel; 15mm blade width. A 4 piece chisel set which features a unique shock absorbent handle with integral hand guard protectionManufactured from a ergonomical, flexible material with special gripping ...
Hand punches for permanent identification markingHardened and tempered ...
Description:
Hand punches for permanent identification markingHardened and tempered to give long life and maximum securityCapable of indenting material up to 40 Rockwell C hardnessSupplied in sturdy plastic boxes.
Our RS high quality, shock resistant tool steel ...
Description:
Our RS high quality, shock resistant tool steel range of dot letter and number punch sets are one of the simplest forms of marking. The punch sets are robust and give clear, permanent and consistent results on different materials where ...
For punching holes in thin sheet steel, aluminium ...
Description:
For punching holes in thin sheet steel, aluminium and brass up to 14 gauge (1.5mm)Tool develops up to 1 ton force7 punches from 3/32 " to 9/32 " in 1/32 stepsSupplied with die key & storage caseThroat depth of 1 ...