Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 41 - 60 of 160 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
    RS Stock No. 501-304
    Mfr. Part No.U1161A
    MYR244.65
    Each
    units
    Test Lead Extension Kit - 4 mm Banana Plug, Crocodile Clip - - 15A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 760-0373
    Mfr. Part No.U1168A
    MYR375.56
    Each
    units
    - - - - - - - - - - -
    RS Stock No. 738-339
    Mfr. Part No.932793001
    MYR135.83
    Each
    units
    Test Equipment Set - Crocodile Clip, Spring Loaded Plug - 1m - - - -15°C +70°C -
    RS Stock No. 442-8294
    Mfr. Part No.80K-40
    BrandFluke
    MYR1,648.50
    Each
    units
    High Voltage Probe - Banana Plug - - 20µA 40000V CAT I 40000 V - - CAT I
    RS Stock No. 324-5975
    Mfr. Part No.TL81A
    BrandFluke
    MYR1,017.45
    Each
    units
    Electronic Test Lead Kit - Crocodile Clip, Hook Clip - 1m 10 A, 3 A, 5 A 300V CAT II 300 V - - CAT II
    RS Stock No. 468-7358
    Mfr. Part No.L215
    BrandFluke
    MYR718.20
    Each
    units
    SureGrip Kit with Probe Light & Extender - - - - - - - - - -
    RS Stock No. 480-2399
    Mfr. Part No.80BK-A
    BrandFluke
    MYR318.15
    Each
    units
    Integrated DMM Probe - Banana Jack - - - - - - - -
    RS Stock No. 412-119
    Mfr. Part No.FLUKE TLK287
    BrandFluke
    MYR1,077.30
    Each
    units
    Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug - - 10 A, 2 A, 5 A 1000 V, 300 V CAT II 300 V, CAT III 1000 V - - CAT II, CAT III
    RS Stock No. 405-499
    Mfr. Part No.20033
    BrandStaubli
    MYR400.97
    Each
    units
    Test Lead Kit - 2 mm Crocodile Clip - - - - - - - -
    RS Stock No. 449-9870
    Mfr. Part No.TL221
    BrandFluke
    MYR213.15
    Each
    units
    Extension Lead Set - Female Coupler, Straight - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 726-3643
    Mfr. Part No.TLK281-1
    BrandFluke
    MYR962.84
    Each
    units
    Automotive Test Lead Kit - Crocodile Clip, Piercing Clip - - - - - - - -
    RS Stock No. 661-2741
    Mfr. Part No.U1164A
    MYR56.60
    Each
    units
    Fine Tip Test Probe - - - - 3A 300V CAT II 300 V - - CAT II
    RS Stock No. 705-1285
    Mfr. Part No.TP175E
    BrandFluke
    MYR195.30
    Each
    units
    Test Probe - Lantern - - 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V -20°C +55°C CAT II, CAT III
    RS Stock No. 456-0427
    Mfr. Part No.TL910
    BrandFluke
    MYR475.65
    Each
    units
    Electronic Test Lead Kit - Spring Loaded Pin - 1m 3A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 449-9892
    Mfr. Part No.TL222
    BrandFluke
    MYR213.15
    Each
    units
    Silicone Test Lead Set - Banana Plug - 1.5m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 775-681
    Mfr. Part No.932959001
    MYR137.45
    Each
    units
    Micro Test Equipment Set - Miniature Crocodile Clip, Spring Loaded Plug, Spring Loaded Socket - 1m - - - -15°C +70°C -
    RS Stock No. 106-0429
    Mfr. Part No.80PK-1
    BrandFluke
    MYR258.30
    Each
    units
    Bead Probe - Miniature Thermocouple - 1m - - - - +200 °C, +260 °C -
    RS Stock No. 850-7697
    Mfr. Part No.TL27
    BrandFluke
    MYR258.30
    Each
    units
    Test Lead Set - Shrouded - 1.5m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 122-9727
    Mfr. Part No.66.9008-150-21+66.9008-150-22
    BrandStaubli
    MYR97.52
    Each
    units
    Test Probe Kit - Straight to Right Angle - 1.5m 20A 1000V CAT II 1000 V - +350°C CAT II
    RS Stock No. 493-3285
    Mfr. Part No.TP88
    BrandFluke
    MYR161.70
    1 Set
    Set(s)
    Rigid Back Probe Pin Set - 2 mm - 2in - 60V dc - - - -
    Related Products
    IDM70 Series Compact Multimeters with high performance. Large ...
    Description:
    IDM70 Series Compact Multimeters with high performance. Large scale display6000 display countDCA μA Data HoldMin/ Max function Frequency Counter Capacitance Measurement Auto Power Off Shock resistant (1m drop) Protective Holster with tilt stand and lead storage.
    All-Metal Versions as Well as Types for Insulated ...
    Description:
    All-Metal Versions as Well as Types for Insulated Fitting. Shock-Proof Safety Sockets for Use Up to 1000 V.Safety Sockets to Adapt From Old 4 Mm Sockets.Terminations for Printed Circuit Board, for Cable Lugs or with Push-On Connection.Loading Up to 32 ...
    Also Shock-Proof Versions for Use Up to 1000 ...
    Description:
    Also Shock-Proof Versions for Use Up to 1000 V.Adapter Leads to Connect From 2 Mm / 2.4 Mm to 4 Mm Systems.Highly Flexible Leads with Double Insulation for Double Safety.Reliable Solutions for Adaption to Safety Technology Required By the Trade ...
    Set of accessories made up of probes offering ...
    Description:
    Set of accessories made up of probes offering both more comfortable use and complete safety for operators.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of ...