Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 21 - 40 of 160 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
    RS Stock No. 125-3732
    BrandRS PRO
    MYR221.72
    Each
    units
    Fused Probe Kit - Straight Plug Yes 1.2m - 1000V CAT III 1000 V -10°C +150°C CAT III
    RS Stock No. 124-7406
    BrandRS PRO
    MYR92.44
    1 Pair
    Pair(s)
    - Automotive Long Reach Sharp Prod - - - 20A 1000 V, CAT II - -20°C +70°C CAT II
    RS Stock No. 181-7406
    BrandRS PRO
    MYR221.49
    Each
    units
    Fused Probe Kit Test Probe - Yes 1.2m 500mA 1000V CAT III 1000 V -20°C +70°C CAT III
    RS Stock No. 125-3731
    BrandRS PRO
    MYR185.32
    Each
    units
    Test Lead Kit - Right Angle Plug Yes 1.25m - 1000V CAT III 1000 V - - CAT III
    RS Stock No. 175-0162
    BrandRS PRO
    MYR418.80
    Each
    units
    Test Lead Set Automotive Back Probe - Yes 1.25m 10A 600 V, 1000 V CAT III 600 V, CAT IV 1000 V - - CAT III, CAT IV
    RS Stock No. 125-3736
    BrandRS PRO
    MYR108.21
    Each
    units
    Test Lead - - - 1.2m 20A 600 V, 1000 V CAT III, CAT IV, 600 V, 1000 V - - CAT III, CAT IV
    RS Stock No. 125-3733
    BrandRS PRO
    MYR187.06
    Each
    units
    Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 15A 1000V CAT III 1000 V - - CAT III
    RS Stock No. 125-3734
    BrandRS PRO
    MYR131.96
    Each
    units
    Fused Test Prods - Banana Jack Yes - - 1000V CAT III 1000 V - - CAT III
    RS Stock No. 212-988
    BrandRS PRO
    MYR194.20
    Each
    units
    Test Lead - Crocodile Clip Yes 1m - 600V CAT III 600 V - - CAT III
    RS Stock No. 726-3624
    Mfr. Part No.TL75-1
    BrandFluke
    MYR168.52
    Each
    units
    Test Lead Kit - Banana Plug - 1.22m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 726-3615
    Mfr. Part No.TL71-1
    BrandFluke
    MYR195.56
    Each
    units
    Test Lead Kit - Right Angle - 1.5m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 692-7147
    Mfr. Part No.11059A
    MYR828.46
    Each
    units
    Kelvin Probe Set - Banana Plug - 800mm - - - - - -
    RS Stock No. 764-8696
    Mfr. Part No.34133A
    MYR224.37
    Each
    units
    Right Angle Plug - Pogo Pin - 1.2m 3A - CAT II - - -
    RS Stock No. 705-1276
    Mfr. Part No.TL175E
    BrandFluke
    MYR228.90
    Each
    units
    Test Lead - 4 mm Banana Plug - 1.2m 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V - - CAT II, CAT III
    RS Stock No. 412-129
    Mfr. Part No.FLUKE TLK289 EUR
    BrandFluke
    MYR981.75
    Each
    units
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - 1.5m 3 A, 10 A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 436-866
    Mfr. Part No.TLK289
    BrandFluke
    MYR1,077.30
    Each
    units
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - - - - - - - -
    RS Stock No. 880-1397
    Mfr. Part No.FTPL-1
    BrandFluke
    MYR759.15
    Each
    units
    Fused Test Probe - - Yes - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +50°C CAT III, CAT IV
    RS Stock No. 468-7415
    Mfr. Part No.TL76
    BrandFluke
    MYR258.30
    Each
    units
    Test Lead Kit - Banana Plug, Shrouded 4 mm - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 741-4358
    Mfr. Part No.TL175
    BrandFluke
    MYR228.90
    Each
    units
    Test Lead Kit - Shrouded - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +55°C CAT III, CAT IV
    RS Stock No. 501-304
    Mfr. Part No.U1161A
    MYR244.65
    Each
    units
    Test Lead Extension Kit - 4 mm Banana Plug, Crocodile Clip - - 15A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    Related Products
    The Keysight 34194A dual lock link kit is ...
    Description:
    The Keysight 34194A dual lock link kit is for use with sub-module vertical combinations as well as side-by-side combinations. It is compatible with the Keysight 34410A, 34411A, 34401A and 34420A DMMs, the Keysight 34970A Data Acquisition Switch Unit, the Keysight ...
    This kit is a must-have for every electrical ...
    Description:
    This kit is a must-have for every electrical student or starting electrician. The Standard-Kit contains:AM-510-EUR Digital multimeterACD-10 PLUS-D, Clamp meter ACD-10 PLUSTPP1-C1, Pocket temperature probe, immersion, centigradeEU-200, Test lead set for AT-2000 and AT-1000Hardcover suitcase.
    The Agilent 34191A dual rackmount flange kit secures ...
    Description:
    The Agilent 34191A dual rackmount flange kit secures the instrument to the front of the System II cabinet. This kit can be used with the 34194A Dual Lock Link Kit to mount two Agilent System II (half-width, 2U height - ...
    Test lead kit ideal for designing and checking ...
    Description:
    Test lead kit ideal for designing and checking electronic circuits.Precision electronic probes supplied with several crimped spring-loaded probe tips for maximum contact with SMD circuit test points.Test leads with micro-wire grips for fine SMD test.Mini crocodile clips, wire grips and ...